Samsung ML-3470 manual Maintenance parts, Clearing the Toner Low Replace Toner message

Page 42

3Remove the new toner cartridge from its bag.

Caution

Do not use sharp objects, such as a knife or scissors, to open the toner cartridge package. They might scratch the drum of the cartridge.

4Remove the packing tape and roll the cartridge 5 or 6 items to distribute the toner.

Thoroughly roll the cartridge to assure maximum copies per cartridge. Save the box and the plastic bag for shipping.

Cautions

• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.

Do not touch the green surface underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.

5Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the printer.

6Tabs on the sides of the cartridge and corresponding grooves within the printer will guide the cartridge into the correct position until it locks into place completely.

Clearing the Toner Low Replace Toner message

When the Toner Low Replace Toner message appears you can configure not to see this message again not to disturb you.

1Press Menu until System Setup appears on the bottom line of the display and press OK.

2Press the scroll buttons until Maintenance appears and press OK.

3Press the scroll buttons until CLR Empty MSG. appears and press OK.

4Select On and press OK.

5Now the Toner Low Replace Toner message does not appear but the Replace Toner message will remain for reminding you that the new cartridge needs to be installed for quality.

Caution

Once you have selected On, this setting will be permanently written to the memory of the toner cartridge, and this menu will be disappeared from the Maintenance menu.

Maintenance parts

To avoid print quality and paper feed problems resulting from worn parts and to maintain your printer in top working condition the following items will need to be replaced at the specified number of pages or when the life span of each item has expired.

Items

Yield (Average)

 

 

Transfer roller

70,000 page

 

 

Pick-up roller

150,000 page

 

 

Fuser unit

80,000 page

 

 

Samsung highly recommends that an authorized service provider, dealer or the retailer where you bought printer performs this maintenance activity. The warranty does not cover the replacement of the maintenance parts after their lifespan.

7Close the front cover. Make sure that the cover is securely closed.

8.4 <Maintenance>

Image 42
Contents Page Page Contact Samsung worldwide Switzerland Contents Troubleshooting Ordering supplies and accessoriesMaintenance Installing accessoriesEnvironmental and Safety Consideration Safety and Regulatory InformationImportant Precautions and Safety Information Laser Safety StatementRecycling Ozone SafetyPower Saver Radio Frequency EmissionsUnited States of America Declaration of Conformity European CountriesWireless Guidance Regulatory Compliance StatementsReplacing the Fitted Plug for UK Only Page Introduction Special featuresSpecial features Printer overview Finding more information You can print in Windows 2000/XP/2003/VistaFeatures ML-3470D ML-3471ND Printer overviewFront view Rear view Control panel overviewML-3470D and ML-3471ND Understanding the Status LED Finding more informationSelecting a location Altitude adjustmentClick Printer Setting Clearance spaceAccessing control panel menus System setupUsing control panel menus Menu overviewInformation menu Layout menuSystem Setup menu Paper menuGraphic menu Emulation menu PostScriptUsing toner save mode Printing a demoChanging the display language Changing the font setting Software overview Supplied softwarePrinter driver features System requirementsWindows Linux MacintoshRequirements Via network administration programs Supported operating systemsVia the control panel Dynamic addressing BOOTP/DHCP Configuring TCP/IPUsing SetIP program Static addressingRestoring the network configuration Configuring EtherTalkSetting Ethernet speed Printing a network configurationLoading print media Selecting print mediaType Size Dimensions Weighta Capacityb Supported sizes of paperGuidelines for selecting and storing print media Guidelines for special print mediaMedia type Guidelines Loading paper Using the tray 1 or the optional tray Changing the size of the paper in the trayUsing the multi-purpose tray Load the paper with the side to be printed on facing upUsing manual feed mode Tips on using the multi-purpose traySelecting an output location Printing to the output tray Face downPrinting to the rear cover Face up Basic printing Canceling a print jobPrinting a document Canceling a print job Printing a documentHow to purchase Ordering supplies and accessoriesAccessories Toner cartridgesCleaning the outside of the printer MaintenanceCleaning the printer Cleaning the inside of the printerMaintaining the toner cartridge Checking the remaining tonerToner Low appears on the display Redistributing toner cartridgeReplacing the toner cartridge Open the front cover Pull the toner cartridge outMaintenance parts Clearing the Toner Low Replace Toner messageItems Yield Average Paper feed area TroubleshootingClearing paper jams TrayOptional tray Multi-purpose trayAround the toner cartridge Paper exit areaDuplex unit area Duplex jamTips for avoiding paper jams Troubleshooting checklist Understanding display messagesOver Heat Error Message Meaning Suggested solutions LSU Motor ErrorOpen Heat Error Self DiagnosticToner cartridge-related messages Solving general printing problems Select Download as Bit Image Advanced OptionsTurn on Print As Image from Solving print quality problems Characters ScatterMisformed SkewCondition Suggested solutions Curl Common Windows problemsCommon PostScript problems Option through Printer Settings Utility or PrinterCommon Linux problems Common Macintosh problemsInstalling a memory Dimm Installing accessoriesPrecautions when installing accessories Disconnect the power cordInstalling a wireless network interface card Setting the memory in the PostScript printer propertiesSelect the Samsung ML-3470 Series printer Configuring the wireless network parameters Configuring basic network settingsRestoring default values for wireless networking Selecting the authentication typeSetting Encryption Hexadecimal AlphanumericPrinter specifications SpecificationsPrinter specifications Specifications and DescriptionIndex Page Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Typical Installation Installing Printer SoftwareInstalling Software for Local Printing Select Typical installation for a local printer. Click NextCustom Installation Select Custom installation. Click Next Select the components to be installed and click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Select the components you want to reinstall and click NextRemoving Printer Software NextPrinting a Document Select your printer driver from the Name drop-down listPrinter Settings Printing to a file PRNSelect Printers and Faxes Select your printer driver icon Layout Tab Paper TabPaper Orientation Source Image ModeGraphics Tab Scaling PrintingWatermark Extras TabAdvanced Options OverlayAbout Tab Using a Favorite SettingUsing Help Printer TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsFitting Your Document to a Selected Paper Size Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document NoneCreating a Watermark Using WatermarksUsing an Existing Watermark Editing a WatermarkUsing a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page OverlayUsing Windows PostScript Driver AdvancedCheck the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Double-clickPrinters and FaxesUnderstanding Smart Panel Toner LevelChanging the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Uninstalling the Unified Linux Driver Click UninstallOpening the Unified Driver Configurator Using the Unified Driver ConfiguratorPrinters Configuration Double-clickUnified Driver Configurator on the desktopConfiguring Printer Properties Ports ConfigurationClasses Tab Printing from Applications Printing FilesUninstalling the printer driver Installing SoftwareInstalling the printer driver Printer driverFor a USB-connected Setting Up the PrinterFor a Network-connected Mac OS 8.6 ~Printing a Document Changing Printer SettingsPrinting LayoutPrinter Features GraphicsPaper Printing Multiple Pages on One Sheet of Paper Duplex PrintingIndex Favorites 17 image mode 15 resolution Rev.4.00