Samsung ML-3470 manual Installing Software for Network Printing, Typical Installation

Page 71

Installing Software for Network Printing

When you connect your printer to a network, you must first configure the TCP/IP settings for the printer. After you have assigned and verified the TCP/IP settings, you are ready to install the software on each computer on the network.

You can install the printer software using the typical or custom method.

Typical Installation

This is recommended for most users. All components necessary for printer operations will be installed.

1Make sure that the printer is connected to your network and powered on. For details about connecting to the network, see the supplied printer’s User’s Guide.

2Insert the supplied CD-ROM into your CD-ROM drive.

The CD-ROM should automatically run, and an installation window appears.

If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.

If you use Windows Vista, click Start →All programs → Accessories →Run, and type X:\Setup.exe.

If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.

3Click Next.

•If necessary, select a language from the drop-down list.

•View User’s Guide: Allows you to view the User’s Guide. If your computer doesn’t have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you.

4Select Typical installation for a network printer. Click Next.

5The list of printers available on the network appears. Select the printer you want to install from the list and then click Next.

•If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.

To verify your printer’s IP address or the MAC address, print a Network Configuration page.

•To find a shared network printer (UNC Path), select Shared Printer [UNC] and enter the shared name manually or find a shared printer by clicking the Browse button.

NOTE: If you cannot find your machine in network, please turn off the firewall and click Update.

6After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung Printers in order to receive information from

7

Installing Printer Software in Windows

Page 70 Page 72
Image 71
Page 70 Page 72
Contents Page Page Contact Samsung worldwide Switzerland Contents Installing accessories Ordering supplies and accessoriesMaintenance TroubleshootingLaser Safety Statement Safety and Regulatory InformationImportant Precautions and Safety Information Environmental and Safety ConsiderationRadio Frequency Emissions Ozone SafetyPower Saver RecyclingDeclaration of Conformity European Countries United States of AmericaReplacing the Fitted Plug for UK Only Wireless GuidanceRegulatory Compliance Statements Page You can print in Windows 2000/XP/2003/Vista Special featuresSpecial features Printer overview Finding more information IntroductionFront view Features ML-3470D ML-3471NDPrinter overview ML-3470D and ML-3471ND Rear viewControl panel overview Finding more information Understanding the Status LEDClearance space Altitude adjustmentClick Printer Setting Selecting a locationMenu overview System setupUsing control panel menus Accessing control panel menusLayout menu Information menuGraphic menu System Setup menuPaper menu PostScript Emulation menuChanging the display language Using toner save modePrinting a demo Changing the font setting Supplied software Software overviewWindows Printer driver featuresSystem requirements Requirements LinuxMacintosh Via the control panel Via network administration programsSupported operating systems Static addressing Configuring TCP/IPUsing SetIP program Dynamic addressing BOOTP/DHCPPrinting a network configuration Configuring EtherTalkSetting Ethernet speed Restoring the network configurationSelecting print media Loading print mediaSupported sizes of paper Type Size Dimensions Weighta CapacitybMedia type Guidelines Guidelines for selecting and storing print mediaGuidelines for special print media Loading paper Changing the size of the paper in the tray Using the tray 1 or the optional trayLoad the paper with the side to be printed on facing up Using the multi-purpose trayTips on using the multi-purpose tray Using manual feed modePrinting to the rear cover Face up Selecting an output locationPrinting to the output tray Face down Printing a document Canceling a print jobPrinting a document Canceling a print job Basic printingToner cartridges Ordering supplies and accessoriesAccessories How to purchaseCleaning the inside of the printer MaintenanceCleaning the printer Cleaning the outside of the printerChecking the remaining toner Maintaining the toner cartridgeOpen the front cover Pull the toner cartridge out Redistributing toner cartridgeReplacing the toner cartridge Toner Low appears on the displayItems Yield Average Maintenance partsClearing the Toner Low Replace Toner message Tray TroubleshootingClearing paper jams Paper feed areaMulti-purpose tray Optional trayPaper exit area Around the toner cartridgeDuplex jam Duplex unit areaTips for avoiding paper jams Understanding display messages Troubleshooting checklistSelf Diagnostic Message Meaning Suggested solutions LSU Motor ErrorOpen Heat Error Over Heat ErrorToner cartridge-related messages Solving general printing problems Turn on Print As Image from Select Download as Bit ImageAdvanced Options Solving print quality problems Skew ScatterMisformed CharactersOption through Printer Settings Utility or Printer Common Windows problemsCommon PostScript problems Condition Suggested solutions CurlCommon Macintosh problems Common Linux problemsDisconnect the power cord Installing accessoriesPrecautions when installing accessories Installing a memory DimmSelect the Samsung ML-3470 Series printer Installing a wireless network interface cardSetting the memory in the PostScript printer properties Configuring basic network settings Configuring the wireless network parametersHexadecimal Alphanumeric Selecting the authentication typeSetting Encryption Restoring default values for wireless networkingSpecifications and Description SpecificationsPrinter specifications Printer specificationsIndex Page Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Select Typical installation for a local printer. Click Next Installing Printer SoftwareInstalling Software for Local Printing Typical InstallationCustom Installation Select the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Select the components you want to reinstall and click Next Reinstalling Printer SoftwareNext Removing Printer SoftwareSelect your printer driver from the Name drop-down list Printing a DocumentSelect Printers and Faxes Select your printer driver icon Printer SettingsPrinting to a file PRN Paper Orientation Layout TabPaper Tab Scaling Printing Image ModeGraphics Tab SourceOverlay Extras TabAdvanced Options WatermarkPrinter Tab Using a Favorite SettingUsing Help About TabPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersNone Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document Fitting Your Document to a Selected Paper SizeEditing a Watermark Using WatermarksUsing an Existing Watermark Creating a WatermarkCreating a New Page Overlay Using OverlaysWhat is an Overlay? Using a Page OverlayAdvanced Using Windows PostScript DriverDouble-clickPrinters and Faxes Setting Up a Host ComputerSetting Up a Client Computer Check the Share this printer boxToner Level Understanding Smart PanelUsing Onscreen Help File Opening the Troubleshooting GuideUsing Printer Settings Utility Changing the Smart Panel Program SettingsGetting Started Installing the Unified Linux DriverInstalling the Unified Linux Driver Click Uninstall Uninstalling the Unified Linux DriverDouble-clickUnified Driver Configurator on the desktop Using the Unified Driver ConfiguratorPrinters Configuration Opening the Unified Driver ConfiguratorClasses Tab Configuring Printer PropertiesPorts Configuration Printing Files Printing from ApplicationsPrinter driver Installing SoftwareInstalling the printer driver Uninstalling the printer driverMac OS 8.6 ~ Setting Up the PrinterFor a Network-connected For a USB-connectedLayout Changing Printer SettingsPrinting Printing a DocumentPaper Printer FeaturesGraphics Duplex Printing Printing Multiple Pages on One Sheet of PaperIndex Favorites 17 image mode 15 resolution Rev.4.00
Top Page Image Contents