TAB 8 | TAB 7 | TAB 6 | TAB 5 | TAB 4 | TAB 3 | TAB 2 |
English
YOUR REMOTE CONTROL
Information display
(V25 and V35 system remotes)
The display provides operating and system status information.
Examples:
•Source identification
Cable
•Volume
Cable 43
• Radio tuner
FM P1
90.9 - WBUR90.9
• iPod
iPod
Album
• Operating prompts
Hold number key
to set preset
Remote glow button
Pressing the glow button on the rear of the remote illuminates the remote buttons (and the display for
V25 and V35 systems). The light turns off automatically after several seconds to prolong battery life.
Glow button
To adjust the illumination level:
Note: To avoid the risk of deleting a radio preset, switch to any source other than AM or FM before making this adjustment.
1.Press and hold the Glow and OK buttons at the same time for 5 seconds.
2.Press the up/down navigation button to select Brightness or Contrast.
3.Press the left/right navigation button to decrease or increase the illumination level.
4.Press either the OK or Glow button to return to normal operation.
4