Using the Printer, Connecting the computer

SRP-370/372 Ver.2

1-8 Using the Printer

Control Panel

○ POWER

The POWER light is on whenever the printer is on.

○ERROR

This indicates an error.

○ PAPER

This light indicates the near end of the paper roll. Install a new paper roll and the printer will continue printing. When the light blinks, it indicates the self-test printing standby state or macro execution Standby state when the macro execution command is used.

○FEED

The button can be disabled by the ESC c 5 command. Press the FEED button once to advance paper one line. You can also hold down the FEED button to feed paper continuously.

1-9 Connecting the computer

You need an appropriate interface cable.

1-9-1 Plug the cable connector securely into the printer’s interface connector.

1-9-2 Tighten the screws on both sides of the cable connector.

1-9-3 Attach the other end of the cable to the computer.

Rev. 2.01

- 18 -