SRP-370/372 Ver.2
4. Specification
Printing method |
| Thermal line printing |
| |
|
|
|
| 203 X 203 dpi |
Dot density |
| 180 X 180 dpi | ||
| (7dots/mm) | (8dots/mm) | ||
|
|
| ||
|
|
|
|
|
Printing width |
| 72mm |
| |
|
|
|
|
|
Paper width |
| 58mm, 80mm, 83mm |
| |
|
|
| 203 DPI 48 (Font A) | |
Characters per line (default) | 180 DPI 42 (Font A) | |||
|
|
| 56 (Font B) | 64 (Font B) |
|
|
|
| Feed) 200mm/sec |
Printing speed |
| 180 DPI | Mono : 47 lines/sec(1/6” | |
|
|
| Color : 23.6 Line/ Sec(1/6inch feed) 100mm/sec | |
|
|
|
| |
|
| 203 DPI | Mono : 52 lines/sec(1/6” Feed) 195mm/sec | |
|
|
| Color : 21 Line/ Sec(1/6inch feed) 90mm/sec | |
|
|
|
|
|
Receive Buffer Size |
| 64K Bytes |
| |
|
|
|
|
|
※NOTE
Printing speed may be slower, depending on the data transmission speed and the combination of control commands.
Supply voltage | SMPS Input voltage | 100~240 VAC |
| |
|
|
|
| |
| Frequency | 50/60 Hz |
| |
|
|
|
|
|
| SMPS Output voltage | 24 | VDC |
|
|
|
| ||
Environmental | Temperature | 0 ~ 45 ℃ (Operating) | ||
Conditions |
| |||
|
|
|
| |
| Humidity | 30 | ~ 80 % RH (Operating) | |
|
| 10 | ~ 90 % RH (Storage) | |
|
| ; Except for paper | ||
|
|
| ||
MCBF * | Mechanism | Monochrome :70,000,000Lines | ||
| 2Color | :35,000,000Lines | ||
|
| |||
|
|
|
| |
Auto cutter life * |
| 1,500,000 Cut |
| |
|
|
|
|
|
*These values are calculated under printing level 2 with recommended paper at normal temperature.
*These values may vary with environment temperature, printing level, etc.
Rev. 2.01 | - 22 - |