Samsung SRP-372 user manual SRP-370/372 Ver.2 Appendix, Cleaning Printer

Page 23

SRP-370/372 Ver.2

5. Appendix

5-1 Cleaning Printer

Paper dust inside the printer may lower the print quality. In this case clean the printer as follows.

5-1-1 Open the printer cover and remove the paper if exists.

5-1-2 Clean the print head with a cotton swab moistened with alcohol solvent.

5-1-3 Clean the platen roller and paper end sensor with cotton swab moistened with water. 5-1-4 Insert a paper roll and close the printer cover.

The remained amount of paper detected by paper near end sensor varies with the diameter of the paper core.

To adjust the remained amount, contact your dealer.

Rev. 2.01

- 23 -

Image 23
Contents SRP-370/372 Ver.2 Do not plug several products in one multi-outlet SRP-370/372 Ver.2 Safety PrecautionsTo Unplug SRP-370/372 Ver.2Label Material Waste Electrical and Electric Equipment Weee※ Note ※ All specifications are subjected to change without noticeSRP-370/372 Ver.2 Introduction Table of Contents Unpacking SRP-370/372 Ver.2 Setting Up the PrinterConnecting the Cables GND ※ Caution Connecting the Drawer※ Warning OFF Setting the Dip SwitchesParallel & USB Interface Switch No Function MSW2 Setting the Memory SwitchesMSW1 MSW8 Installing or Replacing the Paper Roll Power Error paper Feed Adjustments and Settings Connecting the computer Using the Printer※ Cautions Connecting the Power SupplyCompleted SRP-370/372 Ver.2 Self TestSelf-test printing Please press the Feed button SRP-370/372 Ver.2 Hexadecimal Dumping VDC SRP-370/372 Ver.2 SpecificationSRP-370/372 Ver.2 Appendix Cleaning Printer
Related manuals
Manual 23 pages 39.93 Kb