Samsung 5100A Button Function, Restore the user default settings, To perform a printer self-test

03-Troubleshooting 5/10/99 4:04 PM Page 3

Button Function

FUNCTION	USAGE
On-line/Off-line	Pressing the button toggles the printer
	between on-line (READY light on) and off-line
	(READY light off) status.
Manual Feed Start	When you print a file if you have selected
	`Manual FeedÕ source, the printer waits you to
	feed paper into the manual feeder. When you
	are ready, press and hold down the button for
	about 2 seconds.
	The printer pulls in the page, and starts
	printing.
	Press the button each time you feed paper
	manually.

Reset	To clear all data from the printerÕs memory
	except permanent fonts and macros, and then
	restore the user default settings:
	Press the button to turn the printer off-line.
	With the READY light off, press and hold
	down the button until all lights are blinking
	(approximately four seconds), then release the
	button.

Self-test	To perform a printer self-test:
	While the printer is on-line (READY light on),
	press and hold down the button until all three
	lights are blinking (approximately four
	seconds), then release the button. A one-page
	printer status sheet will be printed.
Image Cartridge	To remove excess toner from the image
Cleaning	cartridge: While the printer is on-line (READY
	light on), press and hold down the button until
	all three lights remain lit (not blinking;
	approximately seven seconds) and the printer
	begins to cycle up (starts feeding paper), then
	release the button. One sheet will be printed.

Operating Your Printer 29