The Remote Control Panel dialog box includes six tabs.
PRINTER
Power Save
Determines the length of time the printer waits after a job is printed before it goes to a reduced power state. If the printer is used constantly, select OFF which keeps the printer ready to print with the minimum
Timeout
Determines the amount of time in seconds the printer waits before printing the last page of a print job that does not end with a command to print the page.
Econo Mode
To get the most from your toner supply, set Econo Mode to ON. If you set Econo Mode to ON, print quality may be reduced.
Jam Recovery
If paper jams as it exits to the output bin, the data on the jammed page will be lost. If you set Jam Recovery feature to ON, the printer keeps the image for a printed page until the printer signals that the page has successfully exited the printer. The printer reprints all jammed pages.
With the feature set to OFF, the printer does not reprint a page that has jammed.
PAGE SETUP
Paper Size
Sets the paper size.
Lines Per Page
Use this menu item to change the number of lines that print on each page. The setting can range from 5 to 228 lines per page.
Copies
Sets the number of copies printed for each page.
Orientation
Determines how the printing is oriented on the page.
36Operating Your Printer