Samsung SRP-270 Series specifications

Page 35

6)Move the print head carriage to the reverse direction of paper jam. By pushing on the side of the print head as shown in the illustration.

7)Remove the jammed paper by rotating the paper-feed knob.

8)Replace the head cover and secure it with screw.

9)Replace the ribbon cassette and roll paper, then close the printer cover.

35

Image 35

Contents Series Introduction Table of Contents Unpacking Checking the Contents of the printer boxInstalling the printer Functions Connecting the AC adapter to the printer Connecting the cablesConnecting Interface Cable and Drawer Cable to the printer Ribbon Cassette Installation Installing the roll paperRoll Paper Installation Page Page Page Setting the DIP switches Baud rate selection DIP Switch 1 SettingEmulation mode selection Dip Switch 2 SettingParallel/USB Interface Specification Hexadecimal Dumping Character Test Completed Self testSelf-test printing Please press the Feed button 0 PC437 USA, Standard Europe International Character Set USA Code Table2 PC850 Multilingual 3 PC860 Portuguese 4 PC 863 Canadian French 5 PC 865 Nordic 19 PC 858 Euro International Character Epson mode Control Commands ListCan Citizen modeStar mode Control code Hexadecimal Function Code Appendix a ConnectorsSerial InterfaceRS-485 Serial InterfaceRS-232CSerial Communication InterfaceExample GND USB Interface Pin No Signal Name Assignment Function Color Drawer ConnectorAppendix B SpecificationRemoving Jammed Paper Appendix C