Beyonwiz FV-L1 manual Manual Configuration

Quick Setup

2) Manual Configuration

If you set “DHCP” to “Disable”, you must input the network settings manually. Use the NUMERIC and LEFT/RIGHT buttons to configure the following items;

IP Address: enter a 12-digit IP address.

Subnet Mask: enter a 12-digit subnet mask.

Gateway: enter a 12-digit gateway.

Primary DNS Server IP: enter a 12-digit primary DNS server IP address.

Secondary DNS Server IP: enter a 12-digit secondary DNS server IP address.

Then press the RED button to update the LAN settings. A “LAN Status” pop-up window will now appear to show you the updated LAN settings. Press EXIT to close the “LAN Status” pop-up window

NOTE

If an address you need to input does not have 12 digits, use preceding 0s to make it 12 digits in length e.g. an address of “192.168.0.1” must be entered as “192.168.000.001”.

The MAC Address setting will display the MAC address of the Ethernet interface, but you cannot change it.

You can also press the GREEN button to open the “LAN Status” pop- up window to check your settings.

If you change the DHCP setting to “Enable”, the manual settings no longer apply, however they will still display the previously set configuration values.

32