Beyonwiz FV-L1 manual Power Off during Recording

STB & PVR Function

5) Power Off during Recording

If you attempt to put the FV-L1 into standby mode while a recording is in progress, a “Power Off” dialog will be displayed, as shown below.

You can then choose from the following options;

Later: the FV-L1 will return to standby mode when the current recording(s) have completed.

Yes: the current recording(s) are stopped and the FV-L1 goes into standby mode immediately.

No: the standby mode procedure is cancelled and the FV-L1 remains on.

Use the LEFT/RIGHT buttons to select your desired option and press

OK.

If a timer starts while the FV-L1 is in standby mode, the FV-L1 will turn on automatically and perform its operation until the timer has completed. If remote control activity is detected during this period, the FV-L1 will remain on so you can continue to use it without interruption, otherwise it will return to standby mode.

NOTE

If AC power is not supplied to the FV-L1 properly (e.g. a power blackout), it cannot perform a timer recording. If a timer fails due to this reason, this timer remains in the timer list as notification.

If AC power is restored within a timer’s duration, the timer will become active immediately and recording will begin.

If AC power is not supplied for a long period i.e. several hours, the internal clock of the FV-L1 will lose it’s time setting, and all timers will fail until the time setting is restored (see “Time Setting” section in Chapter 4).

If you do not respond to the “Power Off” pop-up dialog, the FV-L1 will behave as if you selected “Later”, and return to standby mode when the recording is finished

54