Beyonwiz FV-L1 manual Select Content Type

File Playback

1) Step 1: Select Content Type

Use the UP/DOWN buttons to select the type of storage device you wish to access, as follows:

HDD: This is the internal hard disk drive. It contains two pre-set folders, as follows;

recording: Stores your recorded TV and Radio programs.

contents: Stores other media files you have transferred onto the internal HDD from external sources.

You can create additional folders on the internal HDD to organise your media files (see “Add Folders” section in Chapter 7).

Network: This will show the following networked devices;

PCs connected to your home network.

Networked storage devices e.g. NAS.

WizPNP servers.

NOTE

Ensure that the PC you wish to access has at least one shared folder set up to allow access and to share contents.

For WizPNP servers to be visible, you must enable the WizPNP Client function (see “WizPNP” section in Chapter 4).

To scan and update the list of PCs connected to your home network, press the RED button.

You can also scan for a specific network device. Press the GREEN button, enter the IP address of the device and select “OK”.

65