Cary Audio Design Cinema 11 owner manual Installation, Location, Getting Started

Page 22

INSTALLATION

LOCATION

To assure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface capable of supporting its weight. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the unit and any additional items in the equipment rack, or on the shelf.

When positioning the Cinema 11, make certain that it has adequate ventilation on all sides, as well as on the top and bottom. In particular, it is a good idea to provide at least two or three inches of room above the unit for air circulation.

DO NOT place CDs, DVDs, videotapes, owner's manuals, or other paper on top of, or beneath, the unit, or in-between multiple amplifiers in a stack. This will block airflow, causing heat build- up, and may create a possible fire hazard.

If the unit is to be enclosed in a cabinet or rack, make certain there is adequate air circulation. Sufficient ventilation should be provided so that hot air may exit, and cool air may enter the cabinet. In some instances, a small cooling fan may be required to insure adequate airflow through the cabinet. If you are in doubt about ventilation requirements for your specific installation, Please contact us.

Avoid installation in humid locations, extremely hot or cold locations, or in areas that are exposed to direct sunlight, moisture or space heating equipment.

GETTING STARTED

Before proceeding, please observe the following precautions when connecting devices to your new Cinema 11.

Do not plug the power cord into your Cinema 11 until all other connections have been made.

Always refer to the instructions that came with the component that you are connecting for specific procedures, warnings and options.

For all analog connections, the red input jacks (R) are used for the right channel, and the white input jacks (L) are used for the left channel. (RCA connectors)

Make sure to insert all plugs and connectors securely.

Improper connections can result in noise, poor performance, or damage to the equipment.

Do not bundle audio or video connection cables with power cords and speaker cables. Doing so may adversely affect the picture and sound quality. For example, run all the power cords down one side of the cabinet, all the signal cords down the other side, and the speaker wires down the center.

When connecting devices to the digital inputs and outputs, you may also consider hooking up the analog connections to and from the components to insure that all signals can be employed by the preamp/processor.

When using the TOSLINK optical input or output jacks, remove the protective cap and keep it in a safe place. When these jacks are not in use the protective cap should be replaced.

21

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Cinema Table of Contents Important Safety Instructions Important Safety Instructions FCC Information for User Thank YOU WelcomeCongratulations on becoming a Cinema 11 owner Product Features Cinema 11 offersUnpacking and Installation Format DescriptionsWelcome About Dolby Pro Logic Audio Inputs / Audio Outputs SpecificationsAnalog Audio Section Digital Audio Main PathAM Tuner Zone 2 PathsControl FM TunerPower Requirements Trigger OutputsControls and Displays Front PanelMaster Volume Knob Rear Panel Analog Audio 7.1 InputAuto Setup MIC-IN RS-232 PortRemote Control Controls and Displays Zone 2 Remote Control Zone 2 Power OFF Press this button to turn the Cinema 11 OFFLocation InstallationGetting Started Connecting a Multi Channel Power Amplifier Second Zone ZonePower Control Connections Power ConnectionAuto Sound Setup Speaker CheckSBL CENSBR Set DistanceSet Room EQ Set Speaker PhaseSet Crossover Points Auto Sound Setup Manual Sound Setup Setup Menu SpeakerSET Distance Setting the Speaker Distance DelaysSpeaker SET Distance SET Balance Speaker SET BalanceSET Crossover Points To Set Channel Levels Using The Test Tone FunctionSetting the Speaker Crossover Points Speaker SET Crossover PointsSetting the Acoustic Calibration Room EQ manually SET Acoustic Calibration Room EQManual Sound Setup Setting the speaker phase manually Setup MenuBetter sounds using SET Speaker Phase Input123456789 =?@ABCDEFGHIJKLMNOPQRSTUVWXYZ Setup MenuInput Back SET Analog in Config SET Analog in Level SettingsTo set Analog in Level Radio To set Analog in ConfigRadio Setup Menu Listening to the Radio Connection Chart Zone To set Zone 2 volumeTo set Zone 2 input Other To set PasswordAV Sync Delay TriggerEdit Custom Name BrightTo set IR Controls To set Triggers To set Late Mode for Dolby DigitalTo set Restore Default To set Auto Input SeekFactory Service Service and CareCare and Cleaning NON-WARRANTY RepairsUnited States Limited Warranty Warranty DisclaimerCary Audio Design

Cinema 11 specifications

Cary Audio Design has long been recognized for its commitment to high-fidelity audio equipment, and the Cinema 11 is a prime example of their engineering excellence. This preamplifier/processor combines both advanced technology and exceptional craftsmanship to create an immersive home theater experience.

One of the standout features of the Cary Audio Cinema 11 is its multi-channel processing capabilities. It supports up to 11 channels of amplification, making it a perfect fit for those looking to create a 9.1.2 or even a 7.1.4 Dolby Atmos setup. This flexibility allows users to tailor their home theater experience to their personal preferences or room dynamics.

The Cinema 11 employs Cary’s proprietary circuitry, which is designed to minimize distortion and enhance overall sound quality. This focus on audio fidelity ensures that users experience the full range of dynamic soundtracks and subtle nuances in their favorite movies and music. The processor is equipped with high-quality Digital-to-Analog Converters (DACs) that facilitate precise audio playback, contributing to a remarkable clarity that audiophiles will appreciate.

Connectivity is another area where the Cinema 11 excels. It features a comprehensive array of inputs and outputs, including HDMI, optical, and coaxial connections, along with support for the latest HDCP standards and various audio formats. This versatility allows it to seamlessly integrate with other components in a home theater system, making setup a breeze.

Moreover, the Cinema 11 incorporates advanced room correction technology, which optimizes audio playback based on the unique characteristics of the listening environment. This feature is crucial for achieving balanced sound in rooms that may pose acoustic challenges.

Cary Audio has also placed an emphasis on user experience with the Cinema 11. The unit includes an intuitive user interface and a fully customizable remote control, allowing users to easily navigate settings and features. The elegant design is aesthetically pleasing, fitting comfortably with any home décor.

In summary, the Cary Audio Design Cinema 11 stands out for its robust features, cutting-edge technology, and superior sound quality. With its emphasis on multi-channel support, advanced circuitry, extensive connectivity options, and user-friendly interface, the Cinema 11 is an ideal choice for home theater enthusiasts seeking a premium audio experience.
Top Page Image Contents