Cary Audio Design Cinema 11 owner manual Speaker SET Balance

Page 31

MANUAL SOUND SETUP

SET BALANCE

This step adjusts the output level of each channel so that they are properly matched. This must be done to insure a correct presentation of multi-channel sound sources. The adjustment must be as precise as possible, and is almost impossible to accomplish by ear. Therefore, we recommend that you use a Sound Level Meter. This device insures that all loudspeaker levels are precisely matched and set accurately. (The Radio Shack Analog Sound level meter is inexpensive and suitable for this task.)

NOTE: If for any reason you are not sure that you can accomplish this calibration task or have any doubts as to how it should be done, please contact Cary Audio's technical support group BEFORE attempting this process (919-355-0010), or use Auto Setup.

Set the meter to Slow response, "C" weighting, and to the 70 dB sensitivity scale. Position the meter at the approximate center of your listening position, at average ear height [approximately 40-46 inches (102-117cm)] with its microphone positioned vertically (pointing at the ceiling). Don't aim the microphone at the speakers, as this will produce inaccurate results. To proceed with the adjustments, you will access the Channel Calibration menu shown below. Set all channels to 75 dB level.

NOTE: The following selected menus appear on the Cinema 11 Display.

SPEAKER

SET BALANCE

To set the channel levels for your system:

1.Press the SETUP button to enter the SETUP MENU. The SETUP MENU/SPEAKER appears.

2.Press the ENTER button to enter the SPEAKER menu.

3. Press the

button to select SET BALANCE menu.

4.Press the ENTER button to enter the SET BALANCE menu. The SET BALANCE/TEST MODE.....Off menu appears.

A special test tone will be generated allowing you to measure the output of the speaker that's playing.

5.

Press the

button until FL (FRONT LEFT) is selected.

6.

Use the

and

buttons to adjust the speaker level.

You can adjust the selected channel level in 0.5dB steps across a range of -15dB to + 15dB. The recommended calibration level is 75dB/SPL as displayed on the meter.

7. Press the

button when you have finished making the FRONT LEFT level adjustment.

Repeat steps 5 and 6 until you have completed setting the level for each speaker in your system. Set all the levels to 75dB.

30

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Cinema Table of Contents Important Safety Instructions Important Safety Instructions FCC Information for User Thank YOU WelcomeCongratulations on becoming a Cinema 11 owner Cinema 11 offers Product FeaturesFormat Descriptions Unpacking and InstallationWelcome About Dolby Pro Logic Audio Inputs / Audio Outputs SpecificationsAnalog Audio Section Main Path Digital AudioFM Tuner Zone 2 PathsControl AM TunerTrigger Outputs Power RequirementsFront Panel Controls and DisplaysMaster Volume Knob Analog Audio 7.1 Input Rear PanelRS-232 Port Auto Setup MIC-INRemote Control Controls and Displays Zone 2 Power OFF Press this button to turn the Cinema 11 OFF Zone 2 Remote ControlLocation InstallationGetting Started Second Zone Zone Connecting a Multi Channel Power AmplifierPower Connection Power Control ConnectionsSpeaker Check Auto Sound SetupSet Distance CENSBR SBLSet Room EQ Set Speaker PhaseSet Crossover Points Auto Sound Setup Setup Menu Speaker Manual Sound SetupSET Distance Setting the Speaker Distance DelaysSpeaker SET Distance Speaker SET Balance SET BalanceSpeaker SET Crossover Points To Set Channel Levels Using The Test Tone FunctionSetting the Speaker Crossover Points SET Crossover PointsSET Acoustic Calibration Room EQ Setting the Acoustic Calibration Room EQ manuallyManual Sound Setup Input Setup MenuBetter sounds using SET Speaker Phase Setting the speaker phase manually123456789 =?@ABCDEFGHIJKLMNOPQRSTUVWXYZ Setup MenuInput Back SET Analog in Config SET Analog in Level SettingsTo set Analog in Level Radio To set Analog in ConfigRadio Setup Menu Listening to the Radio Connection Chart Zone To set Zone 2 volumeTo set Zone 2 input Trigger To set PasswordAV Sync Delay OtherEdit Custom Name BrightTo set IR Controls To set Auto Input Seek To set Late Mode for Dolby DigitalTo set Restore Default To set TriggersNON-WARRANTY Repairs Service and CareCare and Cleaning Factory ServiceWarranty Disclaimer United States Limited WarrantyCary Audio Design

Cinema 11 specifications

Cary Audio Design has long been recognized for its commitment to high-fidelity audio equipment, and the Cinema 11 is a prime example of their engineering excellence. This preamplifier/processor combines both advanced technology and exceptional craftsmanship to create an immersive home theater experience.

One of the standout features of the Cary Audio Cinema 11 is its multi-channel processing capabilities. It supports up to 11 channels of amplification, making it a perfect fit for those looking to create a 9.1.2 or even a 7.1.4 Dolby Atmos setup. This flexibility allows users to tailor their home theater experience to their personal preferences or room dynamics.

The Cinema 11 employs Cary’s proprietary circuitry, which is designed to minimize distortion and enhance overall sound quality. This focus on audio fidelity ensures that users experience the full range of dynamic soundtracks and subtle nuances in their favorite movies and music. The processor is equipped with high-quality Digital-to-Analog Converters (DACs) that facilitate precise audio playback, contributing to a remarkable clarity that audiophiles will appreciate.

Connectivity is another area where the Cinema 11 excels. It features a comprehensive array of inputs and outputs, including HDMI, optical, and coaxial connections, along with support for the latest HDCP standards and various audio formats. This versatility allows it to seamlessly integrate with other components in a home theater system, making setup a breeze.

Moreover, the Cinema 11 incorporates advanced room correction technology, which optimizes audio playback based on the unique characteristics of the listening environment. This feature is crucial for achieving balanced sound in rooms that may pose acoustic challenges.

Cary Audio has also placed an emphasis on user experience with the Cinema 11. The unit includes an intuitive user interface and a fully customizable remote control, allowing users to easily navigate settings and features. The elegant design is aesthetically pleasing, fitting comfortably with any home décor.

In summary, the Cary Audio Design Cinema 11 stands out for its robust features, cutting-edge technology, and superior sound quality. With its emphasis on multi-channel support, advanced circuitry, extensive connectivity options, and user-friendly interface, the Cinema 11 is an ideal choice for home theater enthusiasts seeking a premium audio experience.
Top Page Image Contents