Cary Audio Design Cinema 11 owner manual Auto Sound Setup, Speaker Check

Page 25

AUTO SOUND SETUP

The AUTO SOUND SETUP feature of the Cinema 11 measures sound characteristics of the speaker system and room where the surround sound processor is used and automatically optimizes settings.

The room EQ technology adopted by the Cinema 11 provides the best listening environment for multiple listeners. To do this, the AUTO SOUND SETUP feature measures a test tone emitted by each channel in a maximum of 6 separate listening positions (to average the overall area sound field), using the supplied microphone. The measurement results are analyzed using an original algorithm and environmental settings are made to improve the sound characteristics of the listening area.

To set up the speaker system (i.e., Adjusting speaker distance, etc.) without using the AUTO SOUND SETUP feature, see the MANUAL SOUND SETUP in the following section of this manual.

HOW TO PERFORM AUTO SOUND SETUP

During measurement, the VFD menu displays the condition, so make sure the power to the power amplifier is ON.

1.Connect the supplied microphone to the MIC jack on the Cinema 11.

2.Set the microphone in the listening position at head height. Notes:

•For the first measurement, set the microphone in the main listening position.

•Use a stand or tripod to position the microphone at ear height in the listening position.

•Remove any obstructions between the speakers and microphone.

•To use a powered subwoofer, set the volume to the middle point and set the crossover frequency to the highest point.

•During measurement, step away from the microphone and operate the Cinema 11 via the remote handset from a position that is out of the path of the speaker sound.

•WARNING: The test tone output from the speakers during measurement is very loud. Keep neighbors and children in mind when running your tests. This test sound is similar to ‘pink’ noise with energy in all audible octaves of sound.

3.Press the TEST button on the remote handset.

VFD will display: Auto Sound Setup? Press ENTER to start.

4.Press the ENTER button to start measurement.

VFD will display: Connect Microphone? Press ENTER to start.

5.Speaker Check

During the Speaker Check, the following VFD appears on the display and checks are made to detect the test sound in the listening room, whether there are speakers connected to each channel or not and the polarity of the speakers as they are connected.

24

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Cinema Table of Contents Important Safety Instructions Important Safety Instructions FCC Information for User Thank YOU WelcomeCongratulations on becoming a Cinema 11 owner Cinema 11 offers Product FeaturesFormat Descriptions Unpacking and InstallationWelcome About Dolby Pro Logic Audio Inputs / Audio Outputs SpecificationsAnalog Audio Section Main Path Digital AudioControl Zone 2 PathsAM Tuner FM TunerTrigger Outputs Power RequirementsFront Panel Controls and DisplaysMaster Volume Knob Analog Audio 7.1 Input Rear PanelRS-232 Port Auto Setup MIC-INRemote Control Controls and Displays Zone 2 Power OFF Press this button to turn the Cinema 11 OFF Zone 2 Remote ControlLocation InstallationGetting Started Second Zone Zone Connecting a Multi Channel Power AmplifierPower Connection Power Control ConnectionsSpeaker Check Auto Sound SetupSBR CENSBL Set DistanceSet Room EQ Set Speaker PhaseSet Crossover Points Auto Sound Setup Setup Menu Speaker Manual Sound SetupSET Distance Setting the Speaker Distance DelaysSpeaker SET Distance Speaker SET Balance SET BalanceSetting the Speaker Crossover Points To Set Channel Levels Using The Test Tone FunctionSET Crossover Points Speaker SET Crossover PointsSET Acoustic Calibration Room EQ Setting the Acoustic Calibration Room EQ manuallyManual Sound Setup Better sounds using SET Speaker Phase Setup MenuSetting the speaker phase manually Input123456789 =?@ABCDEFGHIJKLMNOPQRSTUVWXYZ Setup MenuInput Back SET Analog in Config SET Analog in Level SettingsTo set Analog in Level Radio To set Analog in ConfigRadio Setup Menu Listening to the Radio Connection Chart Zone To set Zone 2 volumeTo set Zone 2 input AV Sync Delay To set PasswordOther TriggerEdit Custom Name BrightTo set IR Controls To set Restore Default To set Late Mode for Dolby DigitalTo set Triggers To set Auto Input SeekCare and Cleaning Service and CareFactory Service NON-WARRANTY RepairsWarranty Disclaimer United States Limited WarrantyCary Audio Design

Cinema 11 specifications

Cary Audio Design has long been recognized for its commitment to high-fidelity audio equipment, and the Cinema 11 is a prime example of their engineering excellence. This preamplifier/processor combines both advanced technology and exceptional craftsmanship to create an immersive home theater experience.

One of the standout features of the Cary Audio Cinema 11 is its multi-channel processing capabilities. It supports up to 11 channels of amplification, making it a perfect fit for those looking to create a 9.1.2 or even a 7.1.4 Dolby Atmos setup. This flexibility allows users to tailor their home theater experience to their personal preferences or room dynamics.

The Cinema 11 employs Cary’s proprietary circuitry, which is designed to minimize distortion and enhance overall sound quality. This focus on audio fidelity ensures that users experience the full range of dynamic soundtracks and subtle nuances in their favorite movies and music. The processor is equipped with high-quality Digital-to-Analog Converters (DACs) that facilitate precise audio playback, contributing to a remarkable clarity that audiophiles will appreciate.

Connectivity is another area where the Cinema 11 excels. It features a comprehensive array of inputs and outputs, including HDMI, optical, and coaxial connections, along with support for the latest HDCP standards and various audio formats. This versatility allows it to seamlessly integrate with other components in a home theater system, making setup a breeze.

Moreover, the Cinema 11 incorporates advanced room correction technology, which optimizes audio playback based on the unique characteristics of the listening environment. This feature is crucial for achieving balanced sound in rooms that may pose acoustic challenges.

Cary Audio has also placed an emphasis on user experience with the Cinema 11. The unit includes an intuitive user interface and a fully customizable remote control, allowing users to easily navigate settings and features. The elegant design is aesthetically pleasing, fitting comfortably with any home décor.

In summary, the Cary Audio Design Cinema 11 stands out for its robust features, cutting-edge technology, and superior sound quality. With its emphasis on multi-channel support, advanced circuitry, extensive connectivity options, and user-friendly interface, the Cinema 11 is an ideal choice for home theater enthusiasts seeking a premium audio experience.
Top Page Image Contents