Cary Audio Design Cinema 11 owner manual Cen, Sbr, Sbl, Set Distance, Set Balance

Page 26

AUTO SOUND SETUP

Speaker check

 

 

FL

Yes

(Yes/No)

CEN

Yes

(Yes/No)

FR

Yes

(Yes/No)

SR

Yes

(Yes/No)

SBR

Yes

(Yes/No)

SBL

Yes

(Yes/No)

SL

Yes

(Yes/No)

SW

Yes

(Yes/No)

Total: 8 speakers

 

 

Press ENTER now.

 

 

Note: The speaker check measures the state of use of all speakers whether actually used or not. For example, if the CEN speaker is not used, the test tone will require time to go from the FL to the FR, therefore be careful not to unplug the microphone or operate the Cinema 11 during this time.

6.When the speaker check ends, the following VFD appears on the display.

Total: 8 speakers (or however many speakers are connected) Press ENTER now

The results of the speaker check will be displayed. The front panel shows confirmation of the number of speakers detected. If some speakers are not detected, make sure that they are all connected properly. After confirming the total number of speakers, press the ENTER button.

7.Set Distance

During Set Distance testing, the following VFD appears on the display and checks are made to detect dart sound in the listening room, whether there are speakers connected to each channel or not and the polarity of the speakers as they are connected.

Set Distance

 

 

FL

0.0ft 0.00m

(0.0ft to 100ft/ 0.00m to 30.3m)

CEN

0.0ft 0.00m

(0.0ft to 100ft/ 0.00m to 30.3m)

FR

0.0ft 0.00m

(0.0ft to 100ft/ 0.00m to 30.3m)

SR

0.0ft 0.00m

(0.0ft to 100ft/ 0.00m to 30.3m)

SBR

0.0ft 0.00m

(0.0ft to 100ft/ 0.00m to 30.3m)

SBL

0.0ft 0.00m

(0.0ft to 100ft/ 0.00m to 30.3m)

SL

0.0ft 0.00m

(0.0ft to 100ft/ 0.00m to 30.3m)

SW

0.0ft 0.00m

(0.0ft to 100ft/ 0.00m to 30.3m)

8.Set Balance

During Set Balance testing, the following VFD appears on the display and checks are made to detect the test sound in the listening room, whether there are speakers connected to each channel or not and the polarity of the speakers as they are connected.

25

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Cinema Table of Contents Important Safety Instructions Important Safety Instructions FCC Information for User Congratulations on becoming a Cinema 11 owner WelcomeThank YOU Product Features Cinema 11 offersUnpacking and Installation Format DescriptionsWelcome About Dolby Pro Logic Analog Audio Section SpecificationsAudio Inputs / Audio Outputs Digital Audio Main PathAM Tuner Zone 2 PathsControl FM TunerPower Requirements Trigger OutputsControls and Displays Front PanelMaster Volume Knob Rear Panel Analog Audio 7.1 InputAuto Setup MIC-IN RS-232 PortRemote Control Controls and Displays Zone 2 Remote Control Zone 2 Power OFF Press this button to turn the Cinema 11 OFFGetting Started InstallationLocation Connecting a Multi Channel Power Amplifier Second Zone ZonePower Control Connections Power ConnectionAuto Sound Setup Speaker CheckSBL CENSBR Set DistanceSet Crossover Points Set Speaker PhaseSet Room EQ Auto Sound Setup Manual Sound Setup Setup Menu SpeakerSpeaker SET Distance Setting the Speaker Distance DelaysSET Distance SET Balance Speaker SET BalanceSET Crossover Points To Set Channel Levels Using The Test Tone FunctionSetting the Speaker Crossover Points Speaker SET Crossover PointsSetting the Acoustic Calibration Room EQ manually SET Acoustic Calibration Room EQManual Sound Setup Setting the speaker phase manually Setup MenuBetter sounds using SET Speaker Phase InputInput Back Setup Menu123456789 =?@ABCDEFGHIJKLMNOPQRSTUVWXYZ To set Analog in Level SET Analog in Level SettingsSET Analog in Config Radio To set Analog in ConfigRadio Setup Menu Listening to the Radio Connection Chart To set Zone 2 input To set Zone 2 volumeZone Other To set PasswordAV Sync Delay TriggerTo set IR Controls BrightEdit Custom Name To set Triggers To set Late Mode for Dolby DigitalTo set Restore Default To set Auto Input SeekFactory Service Service and CareCare and Cleaning NON-WARRANTY RepairsUnited States Limited Warranty Warranty DisclaimerCary Audio Design

Cinema 11 specifications

Cary Audio Design has long been recognized for its commitment to high-fidelity audio equipment, and the Cinema 11 is a prime example of their engineering excellence. This preamplifier/processor combines both advanced technology and exceptional craftsmanship to create an immersive home theater experience.

One of the standout features of the Cary Audio Cinema 11 is its multi-channel processing capabilities. It supports up to 11 channels of amplification, making it a perfect fit for those looking to create a 9.1.2 or even a 7.1.4 Dolby Atmos setup. This flexibility allows users to tailor their home theater experience to their personal preferences or room dynamics.

The Cinema 11 employs Cary’s proprietary circuitry, which is designed to minimize distortion and enhance overall sound quality. This focus on audio fidelity ensures that users experience the full range of dynamic soundtracks and subtle nuances in their favorite movies and music. The processor is equipped with high-quality Digital-to-Analog Converters (DACs) that facilitate precise audio playback, contributing to a remarkable clarity that audiophiles will appreciate.

Connectivity is another area where the Cinema 11 excels. It features a comprehensive array of inputs and outputs, including HDMI, optical, and coaxial connections, along with support for the latest HDCP standards and various audio formats. This versatility allows it to seamlessly integrate with other components in a home theater system, making setup a breeze.

Moreover, the Cinema 11 incorporates advanced room correction technology, which optimizes audio playback based on the unique characteristics of the listening environment. This feature is crucial for achieving balanced sound in rooms that may pose acoustic challenges.

Cary Audio has also placed an emphasis on user experience with the Cinema 11. The unit includes an intuitive user interface and a fully customizable remote control, allowing users to easily navigate settings and features. The elegant design is aesthetically pleasing, fitting comfortably with any home décor.

In summary, the Cary Audio Design Cinema 11 stands out for its robust features, cutting-edge technology, and superior sound quality. With its emphasis on multi-channel support, advanced circuitry, extensive connectivity options, and user-friendly interface, the Cinema 11 is an ideal choice for home theater enthusiasts seeking a premium audio experience.
Top Page Image Contents