Samsung 913V manual Refer to the Preset Timing Modes, Panel → Display → Settings

Page 41

The screen shows strange colors or just black and white.

The screen suddenly has become unbalanced.

intervals?

Is the screen displaying only one color as if looking at the screen through a cellophane paper?

Have the screen colors become strange after running a program or due to a crash between applications?

Has the video card been set properly?

Have you changed the video card or the driver?

Have you adjusted the resolution or frequency to the monitor?

the screen.

Check the signal cable connection.Make sure the video card is fully inserted in it's slot.

Reboot the computer.

Set the video card by referring to the video card manual.

Adjust screen image position and size using the OSD.

Adjust the resolution and frequency at the video card.

(Refer to the Preset Timing Modes.)

The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

The screen is out of focus or OSD cannot be adjusted.

LED is blinking but no images on the screen.

Have you adjusted the resolution or frequency on the monitor?

Is the frequency properly adjusted when checking the Display Timing on the menu?

Adjust the resolution and frequency of the video card.

(Refer to the Preset Timing Modes.)

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.

(The maximum frequency per resolution may differ from product to product.)

There are only 16 colors shown on the screen. The screen colors have changed after changing the video card.

There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".

Have the Windows colors been

Windows ME/2000/XP:

set properly?

Set the colors properly at the Control

 

Panel → Display → Settings.

Has the video card been set

Set the video card by referring to the

properly?

video card manual.

Have you installed the monitor

Install the monitor driver according to

driver?

the Driver Installation Instructions.

See the video card manual to

Install the monitor driver according to

see if the Plug & Play (VESA

the Driver Installation Instructions.

DDC) function can be

 

supported.

 

Check when MagicTune does not function properly.

MagicTune™ doesn't work properly.

MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and Play.

Have you changed your PC or video graphic card?

*To check whether your PC is available for MagicTune feature, follow the

steps below (When Windows is XP);

Control Panel -> Performance and Maintenance -> System -> Hardware -> Device Manager -> Monitors -> After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware.

MagicTune is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune

Download the latest program. The program can be downloaded http://www.samsung.com/monitor/magictune.

Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.

Page 40 Page 42
Image 41
Page 40 Page 42
Contents SyncMaster Do not use a damaged or loose plug PowerInsert the power plug firmly so that it does not come loose InstallationDo not drop the monitor when moving it Use only a properly grounded plug and receptacleDo not place the product on the floor Keep any heating devices away from the power cableSet down the monitor carefully Do not place the monitor face downDo not spray water or detergent directly on the monitor CleanDo not remove cover or back OthersNever insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetFalling product could cause physical damage even death Unpacking Front Sub 15-pin port RearMonitor Assembly Attaching a base Microsoft Windows XP Operating System Windows XP/2000Click Windows XP/2000 Driver Page Page Linux Operating System How to install Click Start , Setting , Control PanelMicrosoft Windows NT Operating System Natural Color Software Program How to install the Natural Color softwareNatural Color Auto Description MagicBrightMenu Picture Adjust BrightnessBrightness Image ColorDescription Play/Stop Color Tone Color Control GammaCoarse Fine Sharpness Position OSDLanguage Position Transparency Display Time SetupInformation Shows a video source, display mode on the OSD screen Basic Functionality What is MagicTune?OSD Mode Installation Page Installationation Problems Hardware Picture Tab Definition Button Tab DefinitionBrightness Color Tab DefinitionColor Tone Image Tab DefinitionOption Tab Definition Image SetupPreferences Support Tab DefinitionPreview Color CalibrationPage Uninstall Troubleshooting Can you see Check Signal Cable on the screen? SymptomMode,Recommanded Mode 1280 x 1024 60Hz on the screen? SolutionsPanel → Display → Settings Refer to the Preset Timing ModesSelf-Test Feature Check Useful Tips General Preset Timing Modes PowerSaverVertical Frequency Horizontal FrequencyAustralia Brazil ServiceGermany United Kingdom PortugalFor Better Display TermsAuthority IC Compliance Notice FCC Information User InstructionsUser Information MPR II Compliance Why do we have environmentally-labelled monitors?European NoticeEurope Only PCT NoticeEnvironmental Requirements What does labelling involve?Lead CadmiumTCO Development Why do we have environmentally labelled computers?CFCs freons Ergonomics Environmental requirements Flame retardantsEmissions EnergyEcology TCO03 Recycling Information TCO03 applied model onlyTransport and Storage Limitations Video In / RS 232 / Video OutSuggestions for specific applications What is Image retention ?Power Off, Screen Saver, or Power Save Mode
Top Page Image Contents