Samsung 800TFT manual Adjusting Your FPD, Menu Adjustments Continued, Expand, puter

Adjusting Your FPD

Table 1. Menu Adjustments (Continued )

Icon

Settings and

Description

Sub-menus

Reset:

Select this icon to return to the factory preset values

• Geometry

for the selected group of functions. Resetting the

• Color

Geometry settings changes the Position settings,

Image Lock settings and changes the Image Size to

Expand 2.

Resetting the Color settings changes the colors back

to their original factory settings.

Language:

Select one of the six languages to use for the OSM.

• English

The language chosen affects only the language of the

• Deutsch

OSM, but does not alter its function. Neither does it

• Español

have any effect on any software running on the com-

• Français

puter.

• Italiano

• Svenska

Menu Display

The OSM stays active for as long as it is in use. The

Time:

Menu Display Time sets the length of time the OSM

• 5 Seconds

will remain active after the last time you pushed a

• 10 Seconds

button. The default time is 10 seconds.

• 20 Seconds

• 200 Seconds

Menu Position:

Select this icon to change the position of the OSM on

• Vertical

the screen. The “–” (

) and “+” (

) buttons move

• Horizontal

the OSM. Select the Horizontal function to move the

OSM to the left or right; select the Vertical function to

move the OSM up or down.

Image Size:

If your computer or video board supplies a signal rate

• Normal

and addressability lower than 1280 x 1024, this FPD

• Expanded 1

provides a scaling processor that can expand the

• Expanded 2

addressability up to 1280 x 1024. Select the Normal

setting to use the normal size viewing area for the cur-

rent signal. Select Expanded 1 to expand the viewing

area to the full width of the FPD screen. Select

Expanded 2 to extend the viewing area both horizon-

tally and vertically to the full size of the FPD screen.

13