Samsung 2263DX user manual Cannot see the On Screen Display, Screen suddenly has become unbalanced

Page 79

Troubleshooting

A:If the display exceeds WSXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 1680 x 1050 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum Mode", "Recommended Mode 1680 x 1050 60 Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

Q:There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals?

A:The monitor is in PowerSaver mode.

A:Press a key on the keyboard to activate the monitor and restore the image on the screen.

A:If there is still no image, press the 'SOURCE/' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

Q:Connected using the DVI cable?

A:You may get a blank screen if you boot the system before you connect the DVI cable, or dis- connect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals. Connect the DVI cable and then reboot the system.

I cannot see the On Screen Display.

Q:Have you locked the On Screen Display (OSD) Menu to prevent changes?

A:Unlock the OSD by pressing the [MENU/ ] button for at least 5 seconds.

The screen shows strange colors or just black and white.

Q:Is the screen displaying only one color as if looking at the screen through a cellophane paper?

A:Check the signal cable connection.

A:Make sure the video card is fully inserted in its slot.

Q:Have the screen colors become strange after running a program or due to a crash between ap- plications?

A:Reboot the computer.

Q:Has the video card been set properly?

A:Set the video card by referring to the video card manual.

The screen suddenly has become unbalanced.

Q:Have you changed the video card or the driver?

A:Adjust screen image position and size using the OSD.

Q:Have you adjusted the resolution or frequency to the monitor?

A:Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes).

Image 79

Contents SyncMaster 2263DX LCD MonitorNotational Conventions Safety InstructionsPower NotationalInstallation Clean Others Page Page Page Introduction Package ContentsUnpacking Front Your Monitor Initial SettingsOthers Customized Key Rear Power Using the Anti-Theft Kensington Lock MIC Connecting Hdmi Connecting CablesConnections Connecting Using a DVI to Hdmi Cable Connecting Using a Hdmi CableConnecting USB Connecting the USB Monitor Installing and Using the USB Monitor Connecting Headphone Using the Stand Monitor Assembly Connecting MICTilt angle Swivel standAttaching a Base Page Minimum baseline spec Using the SoftwareUsing the WebCam Monitor Auto Setup for the web camera, microphone and speakerInstallation Precautions Checking the configuration If the installation failsChecking the Microphone and Speaker Setup Checking the Web Camera SetupRestrictions on Using the Monitor Web Cam Companion Page Opening the chat program Magic-I Visual Effects Page Media-Impression Page Page Installing Your USB Monitor Installing the 7 USB Monitor DriverPage Configuring the 7 USB Monitor Display Information Checking the configuration Restrictions on the 7 USB Monitor Initial Screen Settings after Installing the ProgramMonitor Driver Installing the Monitor Driver AutomaticInternet web site Installing the Monitor Driver Manual Page Page Page Page Page Page Natural Color Natural Color Software Program How to install the Natural Color softwareHow to delete the Natural Color software program Direct Functions Adjusting the MonitorOSD Lock & Unlock Page MagicBright MagicColor Color Effect Image Size Customized keyPicture Brightness Contrast MagicBright Picture Mode VolumeOSD Function Contrast Picture BrightnessMagicBright Picture Mode Standard ColorMagicColor DynamicColor Tone Color Effect Color ControlGamma Mode 1 Mode 2 ModeImage Coarse Sharpness FinePosition Language OSDAdjusting the Monitor Display Time TransparencyOff On Sec 10 sec 20 sec 200 sec Setup ResetNo Yes Off Off TimerAuto Source Image Size PC ModeAuto Manual HDMI/DVI Mode AV Mode Information Hdmi Black LevelAdjusting the Monitor Menu → , →MENU Useful Tips TroubleshootingSelf-Test Feature Check EnvironmentNo images on the screen. I cannot turn on the monitor Check ListScreen shows strange colors or just black and white Cannot see the On Screen DisplayScreen suddenly has become unbalanced LED is blinking but no images on the screen Screen is out of focus or OSD cannot be adjustedScreen of the USB monitor freezes Have connected the USB monitor but it does not boot upMy USB monitor is connected but the screen is blank Page Page General Monitor SpecificationsPlug and Play Capability USB MonitorVesa Mounting Interface Environmental considerationsDimensions W x H x D / Weight Simple Stand PowerSaverPreset Timing Modes For Better Display InformationProduct Information Image Retention Free Display Information together with Logo or Moving image cycle Page Our LCD Monitor satisfies ISO13406-2 Pixel fault Class Latin America AppendixContact Samsung Worldwide North AmericaAsia Pacific CISMiddle East & Africa TermsAuthority Correct Disposal