General operation

Demo mode

This mode is used to highlight the benefits of the Hi Pix setting.

Press the DEMO button on the remote control to switch to Demo mode.The TV set alternates between on and off with the Hi Pix setting. Press the DEMO button as many times as you need to exit Demo mode.

List

01ARD

02ZDF

03SAT1

04ESPORT

05RTL

06RTL2

07VOX

08SW3

09WDR

Select prog.: OK or last digit of number Page + :

Page - :

Zoom

In TV mode, you have the option of changing the display format and using the zoom		EN
function via the	buttons.The available formats and zoom functions are:

4/3 format - picture in centred 4:3 format

Zoom 14/9 - picture in centred letterbox 14:9 format

Zoom 16/9 - picture in centred letterbox 16:9 format

Zoom 16/9 /- picture in 16:9 format with subtitles

Cinerama - picture in widescreen 4:3 format

16/9 format - picture in widescreen 16:9 format

In Zoom 14/9, Zoom 16/9, and Zoom 16/9 / modes, you can temporarily shift

the picture up and down using the buttons.

This function is not available for Progressive Scan sources (480p, 576p) and HD sources (720p and 1080i).

List of programmes

Press the LIST (green) button on the remote control to display the list of programmes. It has 11 pages and shows the name and the number of each programme.The last page lists units connected to the AV sockets.

The list appears on the page featuring the channel or AV programme which you are currently watching.The channel or AV programme you are watching is indicated by a symbol. Any channels and AV programmes which are locked are indicated by a red closed padlock and those temporarily unlocked are indicated by an open green padlock.

Note: For more information on locking channels, refer to the Parental control section.

To watch one of the programmes on the displayed page, use the PR+/PR- or buttons and press OK.You can also enter the last digit of the programme number (for example, 5 for 25).The selected programme is shown.

You can scroll through the pages using the buttons.

Press EXIT to close the menu.

Freezing a picture

Press the FREEZE button to freeze the picture. Press any button on the remote control or TV set to cancel this function. In PIP mode, press the FREEZE button to freeze the main picture.

Flat batteries

When the batteries are flat a message appears on the screen when you press a button on the remote control.

You should change the batteries and reprogram the remote control (see page 4).