Technicolor - Thomson ITC250S manual Setting the time, Programming the sleep timer

Page 15

Time

Return

 

 Sleep timer

00:15

Clock reference programme

02

Time and date

12:34 03/03/03

Wake-up timer

 

Wake-up time

07:00

Switch on for

01:00

Programme number

10 CNN

Daily

 

Advanced functions

Setting the time

The TIME menu can be used to set the time on the TV set and program the automatic sleep timer or wake-up timer functions.

Display the OVERVIEW menu by pressing the MENU button. Select the Time option and press OK to confirm.

Setting the time

 

 

1. Select the Clock reference programme option.

 

EN

2.

Select a channel with Teletext which can provide the time to be used as a reference

 

 

using the

buttons, or enter a channel number using the numeric buttons on the

 

 

remote control.The time is displayed after a few seconds if it is available on the

 

 

selected channel.

 

 

 

If the time is not provided by Teletext the Wake-up timer function is not available

 

 

and a message prompts you to change reference channel or enter the time manually.

 

 

You do this by selecting the Time and date option and entering the time using the

 

 

numeric buttons or the

buttons.

 

Note: If the power supply is disrupted (i.e. the set is switched off using the on/off button or unplugged, or there is an electrical fault), the time will disappear if it has been entered manually. You must reset it. We therefore recommend you find the time on a channel and check that it is correct.

Once the time has been set you can use the Wake-up timer function.

Programming the sleep timer

1.Select the Sleep timer option.

2.Set an automatic shut-off time (from 0 to 4 hours in 5-minute intervals) by using the

buttons. Set the time to 00:00 to disable this function.

When the sleep timer is on, a message appears one minute before the television set goes into standby mode. Press any button on the remote control to cancel standby mode.

Programming the wake-up timer

This function can be used to set the time for the set to come on, for instance, for the television to wake you up.

1.Select the Wake-up timer option and press OK to check the box, which enables this function and provides access to the relevant options.

2.Under the Wake-up time option enter the wake-up time using the numeric or

buttons.

3.Under the Switch on for option, use the buttons to set the period of time (from 5 minutes to 4 hours in intervals of 5 minutes).

4.Under the Programme number option enter the number of the channel you want

to wake you using the or numeric buttons.You can also select an AV programme using the AV button. In this case, make sure you programme the equipment connected to the AV socket to come on as well.

5.For a daily wake-up check the box for the Daily option by pressing OK.

6.Press EXIT to close the menu.

7.Put the TV set into standby mode using the button on the remote control.

The TV set will automatically switch on at the programmed time and for the programmed duration if you do not interrupt it by using the remote control.

15

Image 15
Contents Contents Care SafetyChapter Getting started Important informationGetting started Specific precautions for DLP TV setsRemote control Using the remote control for other equipmentProgramming the remote control Programming the volume control function Manual programmingVideo recorder DVD player Satellite receiver Hi-fi system Deleting ALL Learned Functions Learning featureAdding a Learned Function Clearing a Learned FunctionSwitching on Chapter Channel set-up Manual installation option and press OKRepeat this procedure to find other channels InstallChapter General operation General operation Advanced functions Adjusting the soundConfiguring the sound settings Headphone settingsAdjusting the picture Advanced functionsGraphic equaliser Lamp & Position UsePosition Programming the wake-up timer Setting the timeSetting the time Programming the sleep timerLocking the buttons on the front of the TV set Accessing the Parental control menuOperation TV mode Parental controlSplit screen mode Picture in picture PIPOverview menu Customising your television PreferencesPreferences Configuring AV sockets Install menuSettings Accessing Teletext TeletextNavigator Other Teletext functions Storing a programme Program Info programme guideDefining search criteria, such as day and period time slot Recording a programmeChecking your selections in the Review screen Sockets Accessing the socket panelChapter Other information Removing the front panel pieceConnecting a video recorder Connecting headphonesConnecting active speakers Connecting an amplifierCopying cassettes Setting up channelsSetting a programme to record About NexTView Link