Technicolor - Thomson ITC250S manual Checking your selections in the Review screen

Advanced functions

	10:00	Thu 29/11
REVIEW	TELETUBBIES
	10:00/10:50	02BBC2
	MEGAMATHS
Return	10:50/11:10	02BBC2
	LOOK AND READ
	11:10/11:30	02BBC2
	4LEARNING
	09:30/12:00	04CHANNEL4
MEMO
	POWERHOUSE
WAKE-UP	12:00	04CHANNEL4
	NEIGHBOURS
	13:45	01BBC1

Record programme overlap!

To select a programme in the list, use the  keys.

Important:

-You can select up to 9 programmes to be stored/recorded.

-A message is displayed when the memory is full.You then have to delete a programme to be able to store or record another.

-A message also appears when the times of some of the programmes you plan to record or have stored overlap.

Checking your selections in the Review screen

The upper part of this screen contains the list of programmes set for recording, while the	EN
lower part contains the programmes stored for wake-up or to remind you when a
programme is starting (memo list).
It appears automatically when you confirm the selection of a programme in the list.You can
also display it by selecting Review from the navigator and pressing OK to confirm.
It provides access to the following functions:

Record: can be used to move a programme from the memo list to the recording list.

1.Select the programme you wish to record from the memo list.

2.Select RECORD from the navigator and press OK to confirm.The programme is then added to the recording list.

Notes:

-This function is only useful if you have a video recorder which has the NexTView Link function and is connected to an AV1 socket. In this case, the television will automatically programme the video recorder.

-The instructions for use are the same as those given in the paragraph “Recording a programme” on the previous page.

Memo: can be used to store a programme from the recording list in the memo list.

1.Select the programme you wish to store from the recording list.

2.Select MEMO from the navigator and press OK to confirm.The programme is then added to the list of stored programmes.

You can now watch another channel, and a message appears informing you that the selected programme is about to start. Press the EXIT button to clear the message.

Wake-up: can be used to programme the TV set to come on when a stored programme or programme set for recording starts.

1.Select the programme from the list.

2.Select WAKE-UPfrom the navigator and press OK to confirm.The picture of an alarm clock appears beside the programme.The Wake-upfunction is enabled whenever you put your television in standby mode. Follow the same procedure to disable this function.

Clear: can be used to clear a programme from the list.

1.Select the programme from the list.

2.Choose CLEAR from the navigator and press OK to confirm.

Press Return to return to the Program Info screen. Press EXIT to quit the programme guide.

23