<Before Attaching Plasma Display>
The Wall Mounting Unit is sold with Frame q and Wall Mounting Unit w fixed together. The following steps should be performed before attaching the plasma display.
1.Take the left and right Frame Fastening Screw Components and remove the Fastening Screw, Spacer Ring, Flat Washer, and Spring Washer.
＊These Frame Fastening Screws, Spacer Rings, Flat Washers, and Spring Washers will be used when attaching the plasma display to the Wall Mounting Unit. Be sure to keep them in a safe place.
Frame Fastening Screw
Spring Washer
Flat Washer
Spacer Ring
q
Frame
w
Wall Mounting Unit
2.Push in the heads of the left and right Frame Removal Lever Screws a and lift up section b to remove the Frame q from the Wall Mounting Unit w.
q
Frame
w
Wall Mounting Unit
Frame Removal
Lever Screws
5