Samsung LW32A23W Viewing the Connection Panel, Connecting an Aerial or Cable Television Network

BN68-448D-03Eng 10/29/03 1:09 AM Page 7

Viewing the Connection Panel

Power Input

☛Whenever you connect an audio or video system to your set, ensure that all elements are switched off.

1Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

-An outdoor aerial

-A cable television network

-A satellite network

2Connecting Set-Top Box, VCR or DVD

-Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.

-If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.

➣ Input/Output Specification

Connector		Input			Output
	Video	Audio (L/R)	S-Video	RGB	Video+Audio (L/R)
SCART 1	✔	✔		✔	Only TV Out
SCART 2	✔	✔			Monitor Out
					(TV/AV1/AV2/AV3/S-VHS)

3Connecting External A/V Devices

-Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

-Connect RCA audio cables to “AUDIO(L)” and “AUDIO(R)” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.

-Headphone may be connected to the headphone output ( 4 ) on the rear of your set. While the headphone is connected, the sound from the built-in speakers will be disabled.

English-7