Plug and Play
When the set is initially powered ON, several basic customer settings proceed automatically and subsequently.
The following settings are available.
1If the set is in standby mode, press the POWER (
) button on the remote control.
Result: The message Plug & Play is displayed. It appears for a little while, and then the Language menu is automatically displayed.
2 | Select the appropriate Language by pressing the or ❷ button. |
| ➣ The available languages are listed. |
| You can choose one of 18 Languages. |
|
|
3Press the ENTER
or ❿ button to confirm your choice.
Result: The message Ant. Input Check is displayed with the OK is selected.
4Press the ENTER
or ❿ button.
Result: The following countries are available:
Belgie - Deutschland - Espania - France - Italia - Nederland - Schweiz - Sverige - UK - East Europe -
Others
5 | Select your Country by pressing the or ❷ button. | ||
| Press the ENTER | or ❿ button. | |
| Result: | The channel search will start and end automatically. | |
|
|
|
|
6Select the Hour or Min by pressing the ➛ or ❿ button.
Set the Hour/Min by pressing the or ❷ button.
(Refer to “Switching the television on and off automatically” on page 40)
7Press the ENTER
button to confirm your setting.
Result: The message Enjoy Your Watching is displayed, and then the channel which has been stored will be activated.
POWER
TV
P.MODE SELECT
