<Instructions for Assembly, cont’d>
Caution | Avoid inserting fingers into the gap between the Frame and the Wall Mounting Unit when |
putting these together, as fingers will get trapped, causing injury. |
5.Fix the Frame and Wall Mounting Unit.
Combine the Frame Fastening Screws, Spacer Rings, Flat Washers, and Spring Washers (from the two pairs of Frame Fastening Screw Components that were put aside when detaching the Frame q from the Wall Mounting Unit w) as shown below and fasten them securely using a screwdriver.
Frame Fastening Screw
Spring Washer
Flat Washer
Spacer Ring
Frame Fastening
Screw Component
Frame Fastening Screw
Spring Washer
Flat Washer
Spacer Ring
＊Confirm that all of the parts are securely fastened and do not rattle and loose.
8