Mitsubishi Electronics LT-46151, LT-40153, LT-46153 manual Pb Pr Component Video Device, Hdmi Device

2. TV Connections 19

Y Pb Pr Component Video Device

HDTV Cable Box, Satellite Receiver, DVD/ Blu-ray Player

Suitable for use with Sound Projector surround sound

If your source device has an HDMI output, use the connections for HDMI devices described on this page instead of component video.

Required:

1.RCA-type component video cables

2.Audio cable(s)

2a. Digital audio cable or

2b. Left/right analog stereo audio cables.

Note:

•To hear digital surround sound from the TV’s Sound Projector speaker array, connect the digital audio output from the device to the TV’s DIGITAL AUDIO INPUT jack.

•To hear digital surround sound from an external sound system, connect the digital audio output from the device directly to your digital A/V receiver.

HDMI Device

HDTV Cable Box, Satellite Receiver, DVD/ Blu-ray Player

Suitable for use with Sound Projector surround sound

Required: HDMI-to-HDMI cable.

Connect an HDMI cable from the TV back panel to the HDMI device output. HDMI devices provide video and audio through the single cable. This connection sends digital surround sound from the source device to the TV’s speaker array.

Mitsubishi recommends you use category 2 (high- speed) HDMI cables to connect HDMI 1.3 source devices. High-speed category 2 cables bring you the full benefits of Deep Color and x.v.Color. See “HDMI Cable Categories” on the opposite page for more on HDMI cable types.

AVR AUDIO OUTPUT

R L

AVR AUDIO OUTPUT

R L

HDMI-to-HDMI cable

TV

TV

1.

Incoming from cable service or satellite dish

Any device with

HDMI output

or 2a.

2b.

Pr Pb Y

VIDEO OUT

R L DIGITAL AUDIO OUT AUDIO OUT

CABLE IN or	Any device with
SATELLITE IN	component video
	output