Mitsubishi Electronics LT-40153, LT-46151, LT-46153 Source device connected directly to the TV

363. Using TV Features

Introduction to Home-Theater Control

This summary offers some examples of control methods available using the TV’s remote control. You may wish to use one or more of these methods in your home theater after completing Auto Input Sensing.

Source device connected directly to the TV

Remote Control Programming (Any Connection Type)

Program the remote control to operate the A/V device. To control the device, set the remote control to the correct mode for the device type. See Appendix B, “Pro- gramming the Remote Control.” In the case of an A/V receiver, use the Audio Lock feature, page 68.

Any Connection Type

A/V TV Device

		HDMI
CEC-Enabled HDMI Device (HDMI Connection Only)		Cable
See Appendix C, “HDMI Control of CEC Devices,” page 74.	CEC-Enabled
			TV
	A/V Device

153 Series: NetCommand IR Control (Any Connection Type)

Set up NetCommand IR control of the device’s keys as desired. See “IR Emitter Placement,” page 53, and “Initial NetCommand Setup,” page 54.

Any Connection Type

A/V TV Device

Source device connected to an A/V receiver connected to the TV

CEC-Enabled HDMI A/V Receiver

The TV’s remote control may operate some functions of a connected A/V device. You can switch to the device by selecting its icon in the TV’s Activity menu. See Appendix C, “HDMI Control of CEC Devices,” page 74.

CEC-Enabled Source Device

A/V Receiver

TV

HDMI Cable

HDMI Cable

153 Series: A/V Receiver with HDMI Output (no CEC)

1.Set up NetCommand IR control of the A/V receiver’s keys as desired. See “IR Emitter Placement,” page 53, and “Setting Up A/V Receiver Control,” page 59.

2.Set up NetCommand IR control of the source device’s keys as desired. See “NetCommand Control of a Device Connected to an HDMI A/V Receiver,” page 63.

Source

Device Any Con-

nection Type

A/V Receiver

HDMI

Cable

TV