Mitsubishi Electronics LT-40153, LT-46151, LT-46153, LT-40151 manual Selecting an Input, Sleep Timer

24 3 Using TV Features

Selecting an Input

The Activity menu lets you switch TV inputs. If you named devices during Auto Input Sensing, the inputs are organized into groups based on possible ways to use each device.

1.Press the Activity key.

2.	Use	to move through groups of TV inputs.
3.	Use	to select an input.

4.Press ENTER to switch to the input.

•To change the list of inputs shown in each activity group, see Inputs > Activity, page 47.

•To assign or change the names of input icons, use the Inputs > Name menu, page 47.

Sleep Timer

The Sleep Timer turns the TV off after the length of time you set.

To set the TV to turn on at a certain time of day, see the Initial > Timer menu on page 44.

Setting the Sleep Timer

1.Press MORE on the remote control. The TV’s MORE menu will display.

2.Press CANCEL (SLEEP) repeatedly to increase the time in 30-minute increments. The maximum is 120 minutes.

3.Press BACK or wait five seconds without pressing any keys for the message to disappear.

Viewing or Changing the Sleep Timer

1.Press MORE.

2.Press CANCEL (SLEEP).

3.Press CANCEL (SLEEP) additional times to change the number of minutes before the TV powers off.

SLEEP

With the MORE menu displayed, press the CANCEL key on the remote control to activate or deactivate the Sleep feature.