Mitsubishi Electronics MDT521S user manual Connecting to a VCR / Stereo Ampliﬁer, Bnc Rca

Page 20

Connecting to a VCR / Stereo Ampliﬁer

You can connect your VCR / stereo ampliﬁer to your LCD monitor. Refer to your VCR / stereo ampliﬁer owner's manual for more information.

Connect the LCD Monitor to a VCR / Stereo Ampliﬁer

•To connect the VIDEO IN connector (RCA, BNC or S-VIDEO) on the LCD monitor, use a video cable or S-video cable. Use a separately available RCA cable or S-video cable.

To connect the AUDIO IN connector (RCA) on the LCD monitor, use an RCA cable.

When connect the RCA or BNC connector, select VIDEO from the INPUT button on the LCD monitor or VIDEO button on the remote control.

When connect the S-VIDEO connector, select VIDEO<S> from the INPUT button on the LCD monitor or VIDEO(S) button on the remote control.

•Turn on the LCD monitor and the ampliﬁer only after all connections have been made.

•Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the ampliﬁer.

•Do not reverse the audio left and right jacks.

•The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO1], [AUDIO2], [AUDIO3] from the AUDIO INPUT button.

•The AUDIO OUT jack outputs sound from the selected Audio input.

Monitor	VCR
To video output
RCA
To audio output		To audio output
L		R
		RCA
BNC
RCA
RCA

English

LCD monitor (second monitor)

BNC

RCA

RCA

To audio input

To audio input

LR

Stereo amplifier

External speaker

English-19

Image 20

Contents LCD Display Monitor HOW to Setup Schedule IndexImportant Information Declaration of ConformityDeclaration Declaration of the ManufacturerRecommended Use ErgonomicsContents Buttons, Switch, and Indicator Parts Name and FunctionsConnectors and Terminals CAT5 input/output connectors modular con- nector 8 pinWireless Remote Control Picture Mode buttonCAT5 Tx BOX Operating Range for the Remote ControlHandling the remote control Setup Procedure Adjust the sound Adjust the screen See pagesAdjust the image See Recommended AdjustmentWhen MDT521S is installed in portrait position CAT5 video connectionLandscape Connection of the CAT5 video connec- tion functionVarious settings involved in the CAT5 video connection Connection to multiple monitorsAllowable cable length CAT5 EQTo avoid monitor from falling Upright position Lay the screen face downVentilation Requirements for enclosure mounting Wiring Diagram ConnectionsBefore making connections HdmiConnecting a Personal Computer Connect the LCD Monitor to a Personal ComputerDVI-D Connecting with Digital Interface EquipmentConnect the LCD Monitor to a Computer with a Digital Output RCA DVI-D Hdmi Connect the LCD Monitor to a DVD PlayerBNC-RCA Connecting to a VCR / Stereo Ampliﬁer Connect the LCD Monitor to a VCR / Stereo AmpliﬁerBNC RCA BNCPower on and OFF Modes Pressing the Main Power SwitchPressing the power button Using the remote controlPower Indicator Using Power ManagementPicture Mode Audio Source SwitchingInformation OSD RGB1, 2, 3, 4DVD/HD VIDEOS, VideoOSD On-Screen-Display Controls Picture Front Sensor Select on for normal use Picture ResetAuto Brightness Screen Audio PIP Picture in PictureConfiguration OFF Timer CAT5 Cable LengthSerial Control RS485 TerminationFilm Mode Advanced OptionIR Control TilingPower on Delay Hdmi Input ModeDVI Input Mode Advanced Option ResetRecommendations HOW to Setup ScheduleImage Persistence To control multiple monitors collectively PIP, POP and Side by SideSupplemental information of the auto brightness function Remote control numbering function To use a computer to control the monitorsControl command diagram InterfaceControl sequence Operation commandsRead command Features Troubleshooting Remote Control is not available SCHEDULE/OFF Timer function is not working properlyNo Signal is displayed on the screen No SoundSpeciﬁcations Speciﬁcations MDT521SPin Assignment RXD TXD GND RTS CTS Mini DIN 4PGND Europe Mitsubishi Contact InformationNorth America