![](/images/new-backgrounds/1200585/20058531x1.webp)
161. Basic Setup and Operation
Basic TV Operation
Selecting an Input to Watch
1. Press INPUT.
2.Press and
to highlight an input icon.
Sample Input selection menu, DVD input selected
3.Press ENTER to switch to the input.
4.To control the input device, use the device’s remote control or see “Introduction to
Note: In most cases, to see a named icon for a con- nected device (as in the samples), you must first assign a name either
•When the device is first connected and the
New Device Found menu offers a choice of names.
•By using the Inputs > Name menu to assign or change a name at any time after the TV has detected the connection.
More About the Input Selection Menu
•To assign helpful names to the icons, see the
Inputs > Name menu, page 55.
•To remove unwanted Antenna, Bluetooth®, or HDMI device icons from the Input Selection menu, see the Inputs > Name menu, page 55.
•To rearrange the icons, see the Inputs > Order menu, page 56.
Watching Broadcast TV
TV Connected to an Antenna or Direct Cable Service (no cable box)
Note: Perform channel memorization to enable recep- tion of digital channels. See page 14.
1.Press INPUT to display the Input Selection menu.
2.Highlight the antenna or cable icon and press ENTER.
Sample Input Selection menu, antenna input selected
3.To tune to a channel from the ANT input, use any of these methods.
•Enter the channel number using the number keys on the remote control and press ENTER.
For a
CANCEL
•Press CH to change channels one channel at a time.
•Press and hold CH to speed through channels.
•Press LAST to return to the previous channel.
•Use the Fav (Favorites) feature to tune to up to nine favorite channels. See page 29.
•Press GUIDE to display ChannelView channel listings, highlight a channel number, and press ENTER to tune.
•Set up ChannelView custom channel banks
and use the CH / key to tune to predefined groups of channels. See page 30.
DownloadedFor assistanceFrom