Mitsubishi Electronics 154 Series, 265 Series Sound Global, Sound Auto SP, Sound SoundPro, Sap

Sound Mode

Stereo

No special audio effects from the TV speakers

Surround

Modifies audio from the TV speakers.

• For monaural (non-stereo) programs, creates a simulated stereo effect.

• For stereo programs, creates a simulated surround sound effect.

• The TV’s speaker array plays surround sound if available.

Music

Optimizes the TV’s speaker array for music listening.

Night

Focuses the TV’s speaker array to a single point to limit sound heard by others

outside the room. Press ENTER to adjust the focal point (Night Angle).

Level Sound

On, Off

Reduces differences in sound volume between programming segments, such as the

difference between regular broadcast programs and commercial segments.

Listen To

Stereo

The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word

(applies only

Stereo is displayed when you tune to a channel broadcasting in stereo.

to analog

Mono

Reduces background noise. Use when receiving a weak stereo audio signal. All

channels from

audio is played as mono.

the ANT input)

SAP

Selects an additional monaural sound track not audible during normal TV viewing.

(Second Audio

The SAP signal might be related to the program (such as a sound track in a foreign

Program)

language), or it might be unrelated (such as a weather report). If an SAP signal is

broadcast, the letters SAP are displayed when you tune to the channel.

Subwoofer

Select On to turn on audio to a connected subwoofer. Set to Off if no subwoofer is connected.

Center Channel

On allows the TV’s speakers to complement your external sound system as a center channel. Set

to Off if not in use.

Sound

Auto SP

265 Series. Performs auto calibration of the Sound Projector speaker array. See “Auto

Setup,” page 40.