|
|
| Troubleshooting | 23 |
|
|
|
|
|
| Sound |
|
| |
|
|
|
|
|
|
| Symptom | Remarks |
|
| 1. | There is no sound even when the | • Check if the MUTE button is on. |
|
|
| volume is turned up. | • The TV’s “Listen to:” setting may be set to SAP (analog program |
|
|
|
|
| |
|
|
| from the ANT input). |
|
|
|
| • Check that the Speakers option is set to TV to hear sound from the | |
|
|
| TV speakers. Sound may be being sent to one of the audio outputs | |
|
|
| for an A/V receiver or headphones. |
|
|
|
| • If using an A/V receiver, check that the Speakers option is set to AV | |
|
|
| Receiver to hear sound from the A/V receiver speakers. |
|
|
|
| • Press and hold the POWER button on the control panel for 10 |
|
|
|
| seconds to perform System Reset. |
|
|
|
|
| |
| 2. | The sound does not match the screen | The TV’s “Listen to:” setting may be set to SAP (analog program from | |
|
| picture. | the ANT input). |
|
|
|
|
|
|
| 3. | The sound from my A/V receiver does | Check that DIGITAL AUDIO OUTPUT and/or AVR AUDIO OUTPUT |
|
|
| not match the screen picture (I should | on TV’s back panel is connected to the A/V receiver. |
|
|
| hear the correct audio from my A/V | Without this connection, devices connected only to the TV (and not | |
|
| receiver). | the A/V receiver) can be heard only from the TV speakers. Note that | |
|
|
| this includes the ANT input, a device (such as a camcorder) con- |
|
|
|
| nected to the front panel, and any other device sending audio to the | |
|
|
| TV only. |
|
|
|
|
| |
| 4. | Cannot select an | Plug an unused video plug into the INPUT 3 Y/VIDEO jack to activate | |
|
| does not appear in the Activity menu. | Auto Input Sensing and make the audio device selectable in the |
|
|
|
| Activity menu. |
|
|
|
|
|
|