Arcam AV888, AVR600, AVR500 manual SAT SAT Device Mode, AV AV Device Mode, Menus

Page 35

SAT SAT Device Mode

The zDevice Mode button configures the CR102 to control the functions of a satellite receiver. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects SAT as the AVR500/AVR600/AV888 source.

PToggles power between standby and on

0…9

Functions as original remote number key.

PHONO

Selects Tape input on the AVR500/AVR600/

EAV888.

SHIFT + Eselects PHONO input on the AVR500/AVR600/AV888.

TV/AV

Toggles between the available inputs on

ryour satellite receiver

SModifies many keys (see individual key descriptions, below)

AUX

Selects multichannel (MCH) input on the

HAVR500/AVR600/AV888.

SHIFT + Hselects AUX input on the AVR500/AVR600/AV888.

NET

Selects iPOD input on the AVR500/AVR600/

eAV888

SHIFT + eselects network (net) internal input on the AVR500/AVR600/AV888

 

Navigate menus.

OK

OK confirms a setting (equivalent to ‘Enter’

 

or ‘Select’ on some remotes).

MControls Backup function, if available.

UPerforms same function as on original remote, if available.

DOn some Satellite and Cable set top boxes this key functions as the Guide key to open the EPG (Electronic Program Guide).

@Toggles the mute function.

By default this key operates the AVR500/ AVR600/AV888 Mute

]Channel down

[Channel up

-+ Decrease (–) and increase (+) AVR500/ AVR600/AV888 volume

)Fast rewind

$Starts the playback

&Toggles pause of playback

(Fast forward

! (not used)

#Stop playback

%Start recording

h(not used)

uDuplicates function of RED key for some

(RED)

Satellite and Cable set-top boxes

 

tDuplicates function of GREEN key for some

Satellite and Cable set-top boxes(Green)

oDuplicates function of YELLOW key for some

(Yellow)

Satellite and Cable set-top boxes

 

bDuplicates function of BLUE key for some

Satellite and Cable set-top boxes(Blue)

AV AV Device Mode

The aDevice Mode button configures the CR102 to control the functions of a television or other display device. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects AV as the AVR500/AVR600/AV888 source.

PToggles power between standby and on. (Some TVs require you to use a number key to turn them on.)

0…9

Functions as original remote number key –

 

usually for channel selection.

Phono

Selects Tape input on the AVR500/

EAVR600/AV888.

SHIFT + Eselects PHONO input on the AVR600/AV888.

TV/AV

Toggles between the available inputs on

ryour display device (e.g. TV/AV)

SModifies many keys (see individual key descriptions, below)

AUX

Selects multichannel (MCH) input on the

HAVR500/AVR600/AV888.

SHIFT + Hselects AUX input on the AVR500/AVR600/AV888.

 

Navigate setup and programme selection

OK

menus.

OK confirms a selection (equivalent to ‘Enter’ or ‘Select’ on some remotes).

MEXIT function on some models.

UFunctionsavailable. as original remote key, if

DDisplay INFO or OSD (On Screen Display) function, if available.

@Toggles the mute function.

By default this key operates the AVR500/ AVR600/AV888 Mute

]Channel down

[Channel up

Decrease (–) and increase (+) AVR500/

-+ AVR600/AV888 volume.

)Toggles TEXT page on/off

$TEXT page off

&Turns Programme-In-Programme (PIP) on, if available

(Activates PIP move, if available

!Activates PIP swap, if available

#Activates PIP freeze, if available

%Activates PIP channel up, if available

hActivates PIP channel down, if available

uDuplicates function of RED key for Text TV

(RED)

tDuplicatesTV function of GREEN key for Text(Green)

oDuplicatesTV function of YELLOW key for Text(Yellow)

bDuplicatesTV function of BLUE key for Text(Blue)

English

E-33

Page 34 Page 36
Image 35
Page 34 Page 36
Contents N d b o o k AVR surround amplifier / AV processor AVR500 / AVR600 / AV888Class II product Safety GuidelinesImportant safety instructions Safety complianceRespect des consignes de sécurité Class II produitInstructions de sécurité importantes Page Welcome ContentsProfessional Installation? DIY setup?Before you Begin… Interconnect cables PowerStandby power Placing the unitTrademark acknowledgements Component/RGB Video Composite GeneralMaking connections Product differences and optionsAVR600 AV888 Zone 2 connectors Hdmi connectorsZone 3 connectors Component/RGB video connectorsMCH input ConnectorsDigital audio Phono Analogue audio Tape inputsInfra-red IR connectors Trigger connectorsUse the Composite connection if Hdmi DVD playerSatellite receiver CD playerConnecting an iPod using the Arcam rDock Aerials, control and communication Video connectorsComponent, S-Video and Composite connectors, see AVR500AV, SAT, DVD Front panel Phones socket For more information on connecting speakers, seeSubwoofer outputs Trigger connectors Preferred video hook-up, in order of preference is VCR, Camcorder, Games Console etcConnecting an iPod using the Arcam rDock DAB option Radio ConnectorsAerial connectors AVR500/AVR600 only SiriusConnecting an aerial RLead/rDock Other ConnectorsData connectors Network connectors USB connector RS232 serial connectorSpeaker cables Connecting speakers AVR500 & AVR600Connecting subwoofers SpeakersSurround left and right CentreSubwoofer Front left and rightSelecting a source Switching onOperation Operating your AVR500 /AVR600 / AV888Extended front panel menu Using Zone 2Updating firmware using a PC Front panel Operation Using the remote control CR102 universal remote controllerInserting batteries into the remote control Useful information Device Mode / Source keysCode blink-back Controlling other devicesOK selects/play the highlighted file AMP AMP Device ModeIPod commands Highlighted menu on the screen TUN TUN Device ModeDVD DVD Device Mode Network commandsMenus SAT SAT Device ModeAV AV Device Mode VCR VCR Device Mode PVR PVR Device ModeOptions track, disc, etc CD CD Device ModeStarts Program mode Shift + rcycles through the repeatSpeaker Levels Essential SetupSpeaker types Speaker DistancesUsing a subwoofer Auto speaker SetupAuto speaker setup ProblemsNavigating the setup menu Setup menusSelecting the audio source VideoSelecting the video source Treble Bass Input ConfigIs used General SetupPlii Dimension Plii Centre Width Plii Panorama General information and system controlsSpkr Levels Auto SetupSpkr Types Spkr DistanceImportant points to remember Video InputsVideo Outputs Progressive scan playbackFor Stereo sources Zone SettingsMode NetworkEnglish Two-channel source modes Decoding ModesIntroduction Decoding modes Multichannel source modesCalibration Offset SettingsVolume Leveller Dolby Volume is a sophisticated newEnglish Tuner Operation Tuning/Channel SelectionSaving and selecting Presets Deleting PresetsOperation Sirius errorsDefault unlock code is Add to your subscriptionInternet radio stations Network/usb OperationSelecting the playback source USB playbackSW2, SW3 External AmplifiersAnalogue pre-amplifier outputs AVR600/AV888 only English XLR balanced line outputs AV888 onlyZone 2 and 3 control outputs Multi-room Set upZone Zone 3 AVR600/AV888 onlyZone English Multi-room connection guideCode Learning Customising CR102Key Mover Volume punch-throughCreating Macros Copy a key between Device Modes Mode MoverLocking/Unlocking a specific Device Mode To restore a moved Device Mode key to its original stateResetting the CR102 Mode key IR punch-throughProblem Check that Wired network Volume is always too loudWhen I turn on Switched offContinual improvement policy SpecificationsProblems? Product GuaranteeWorldwide Guarantee Claims under guaranteeDevice code Tables ITC HCMICE IRTSEI RFTSBR SEGKLH AVPGPX KECDKK ADBNTL UPCENG CATCGV DCEUEC AsciSKY+ TPSYES SH222E Issue
Related manuals
Manual 74 pages 48.95 Kb Manual 68 pages 17.1 Kb Manual 68 pages 27.09 Kb

AV888, AVR500, AVR600 specifications

The Arcam AVR600 is a high-performance AV receiver that is designed for audiophiles and home cinema enthusiasts who seek a premium audio and video experience. This receiver stands out with its array of features and technologies that elevate sound quality and user experience.

At the heart of the AVR600 is its high-fidelity amplification system. The receiver is equipped with a robust 7-channel amplification setup, delivering a total output of 120 watts per channel into 8 ohms. This power enables the AVR600 to reproduce dynamic audio with precision, whether it be for movies, music, or gaming. The class G amplifier design offers exceptional efficiency and reduces distortion, ensuring that sound remains clean and focused even at higher volumes.

The AVR600 boasts extensive connectivity options to accommodate various audio and video sources. It features multiple HDMI inputs and outputs supporting 3D video and 4K scaling, providing flexibility for connecting modern devices. The unit also includes analog and digital inputs, a dedicated phono input for vinyl enthusiasts, and support for multi-room audio setups. With its built-in Bluetooth and network streaming capabilities, users can easily access high-resolution audio files from their digital libraries or popular streaming services.

One of the key technologies in the AVR600 is its advanced room correction system, known as Dirac Live. This sophisticated calibration tool analyzes the acoustics of the room and automatically adjusts the output of the receiver to compensate for any sound anomalies. As a result, listeners experience optimized sound tailored to their specific environment, enhancing the overall listening experience.

For video performance, the AVR600 supports a range of formats, including Dolby Atmos and DTS:X, ensuring an immersive home theater experience with enveloping surround sound. It also features advanced video processing capabilities, allowing users to upscale standard-definition and high-definition content to near 4K quality, further enhancing picture clarity.

In terms of user interface, the AVR600 provides an intuitive on-screen display and a well-designed remote control that makes navigating through settings and options seamless. The receiver is also compatible with smartphone apps for additional convenience, allowing users to control playback and settings directly from their mobile devices.

Overall, the Arcam AVR600 is a versatile audio-visual receiver that combines power, connectivity, and advanced technologies to create an exceptional home entertainment experience. Its unique blend of performance and flexibility makes it an excellent choice for those looking to invest in high-quality audio and video solutions for their homes.
Top Page Image Contents