JVC AV-27115, C-13110 Remote Programming, Setting the Catv & VCR Codes, Search Codes Function

10 Remote Programming

Setting the CATV & VCR Codes

You can program your remote to operate your cable box or satellite receiver by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the search code function, use the remote control supplied by the manufacturer.

Cable Box or Satellite setup (TV models AV-20120, AV-20121, and AV-27120 only)

The remote control is programmed with CATV and/or Satellite codes for power on, power off, channel up, channel down, and 10 key operation.

1)Find the CATV/Satellite brand from the list of codes shown below.

2)Slide the 2-way selector switch to “CATV”.

3)Press and hold down the DISPLAY button.

4)With the DISPLAY button held down, enter the first code number listed using the 10 key pad.

5)Release the DISPLAY button.

6)Confirm the operation of the Cable Box/Satellite receiver.

•If your CATV or Satellite box does not respond to the first code, try the others listed. If it does not respond to any code, try the Search Codes Function at the bottom of the page.

CABLE BOXES	CODES	CABLE BOXES	CODES	DIGITAL		CODES
		Puser	032	SATELLITE
ABC	024			SYSTEMS
Archer	032, 025	RCA	061, 070
Cableview	051, 032	Realistic	032	Echostar	100
Citizen	022, 051	Regal	058, 064, 040, 041, 042, 045,	G.E.	106
Curtis	058, 059		068	Gradiente	112
Diamond	024, 032, 025	Regency	034	Hitachi	104, 111
Eagle	029	Rembrandt	037, 032, 051, 038	HNS (Hughes)	104
Eastern	034	Samsung	051	Panasonic	105
GC Brand	032, 051	Scientific Atlanta	057, 058, 059	Philips	102, 103
Gemini	022, 043	SLMark	051, 047	Primestar	108
General Instrument	065, 024, 025, 026, 027, 020,	Sprucer	051, 056	RCA	106, 109, 110
	021, 022, 057, 023	Stargate	032, 051	Sony	107
Hamlin	040, 041, 042, 045	Telecaption	067	Toshiba	101
Hitachi	049, 024	Teleview	047, 051	Uniden	102, 103
Jerrold	065, 024, 025, 026, 027, 020,	Texscan	044
	021, 022, 057, 023	Tocom	035, 036, 066
Macom	049, 050, 051, 054	Toshiba	050
Magnavox	033	Unika	032, 025
Memorex	030	Universal	022, 032
Movietime	032, 051	Videoway	052
Oak	039, 037, 048	Viewstar	029, 030
Panasonic	055, 056, 060	Zenith	063, 046
Paragon	063	Zenith/Drake	046
Philips	028, 029, 030, 052, 053, 031,	Satellite
	069
Pioneer	047, 062
Pulsar	051, 032

Search Codes Function:

1)Slide the 2-Way Mode Selector switch to CATV.

2)Press the TV POWER and RETURN+ buttons. Hold for at least three seconds and release.

3)Press TV POWER, see if the CATV or Satellite box responds.

4)If there was a response, press RETURN+. The operating codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 more than 70 times without a response, use the remote control which came with the equipment.