JVC C-13110, AV-27115 manual General Items, Set Clock Auto XDS, Set Clock Manual, TV Speaker

Page 21

General Items 21

Set Clock - Auto (XDS)

Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most Public Broadcasting (PBS) stations.

To set the clock using the XDS signal:

Enter the channel number of your local PBS station

Press MENU

To SET CLOCK To operate

To AUTO

MODE

AUTO MANUAL

TIME ZONE

EASTERN

D.S.T.

ON OFF

 

FINISH

 

 

To TIME ZONE

To select your time zone

To move to Daylight Savings Time (D.S.T.) To turn D.S.T. ON or OFF

To FINISH

To Exit and save settings

If you do not have a PBS station in your local area, you will have to set the clock manually. See ‘Set Clock - Manual’ at the top of the next column for instructions.

The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in October.

Set Clock - Manual

To set your clock manually (without using the XDS signal), choose MANUAL from the Set Clock menu and follow the steps below.

MODE

AUTO MANUAL

TIME

--:-- --

 

START CLOCK

 

 

To move to the hour

To set the hour

To move to minutes

To set the minutes

To move to START CLOCK

To start clock and exit

THANK YOU !!

TV Speaker

If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the audio through your stereo.

Press the MENU button

To TV SPEAKER

TV SPEAKER ON OFF

To turn the TV's speakers ON or OFF

EXIT when finished

• Before you turn the TV Speaker setting from OFF to

ON, make sure that the TV volume level is low! If the TV volume is set too high, the sound level will be extremely loud.

After a power interruption, the TV Speaker settings will return to “ON”.

NOTES:

The TV Speaker option is available only on the following models: • AV-20120,AV-20121,AV-27120

XDS (Automatic clock-setting feature) is available on all models except for AV-27115. You will have to reset the clock after a power interruption of 90 seconds or longer. You must set the clock before operating any timer functions.

Image 21
Contents Color Television Users Guide Important Safety Precautions USE Table of Contents Connections Connections Connections Checklist Read ME FirstCable and VCR Connections For Stereo Models AV-27120 AV-20120, AV-20121 Only Audio/Video Connections StereoGetting Started Remote ControlsRM-C381 RM-C205Power Adjusting VolumeChanging Channels Setting the Catv & VCR Codes Remote ProgrammingSearch Codes Function MGA VCR setupUsing the Menu Using this GuideOnscreen Menus Auto Tuner Setup Initial SetupChannel Summary Programming will take approximately 1 to MinutesChannel Summary Lock Set Lock CodeChannel Guard Message To set up the TV Parental Guideline Ratings ChipChip Directions to set up Movie Ratings Directions to Block ViewingSpecial Note about Ratings Directions to Block Unrated Programs Directions to Block Movie ViewingSet Lock Code Accessing V-Chip InformationPicture Settings Bass Sound SettingsTreble BalanceSet Clock Auto XDS General ItemsSet Clock Manual TV SpeakerLanguage On/Off TimerClosed Caption BackgroundButton Functions 100+ Button Number Buttons 10 Key PadMuting InputTroubleshooting What YOU Must do for Warranty Service Limited WarrantyToll Free 1 800 Authorized Service CentersJVC Company of America Specifications