Initial Setup 13
Auto Tuner Setup
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/- buttons) you will receive only clear, active channels.
Press the MENU button
To AUTO TUNER SETUP
To operate
TUNER MODE : CABLE AIR
START
To choose CABLE or AIR
To move to START
To start Auto Tuner Setup
NOW
PROGRAMMING !
48
Programming will take approximately 1 to 2
minutes.
PROGRAMMING OVER!
Channel Summary
Channel Summary allows you to customize the
Press the MENU button
To CHANNEL SUMMARY
To operate
The Channel Summary screen (below) will now be displayed with the channels set to scan marked with an "X". You can delete channels from the scan by removing the "X". If any channels were missed during Auto Tuner Setup and you wish to add them, you may by placing an "X" next to the channel number.
CH | ADD |
| : | CH | ADD |
|
01 | – | – | : | 06 | X | – |
02 | X | – | : | 07 | – | – |
03 | X | – | : | 08 | – | – |
04 | X | – | : | 09 | X | – |
05 | X | – | : | 10 | X | – |
|
|
|
|
|
|
|
To the ADD column
To include or delete from scan
Exit when finished
•Noise Muting will not work during Auto Tuner Setup.
NOTES:
Some cable systems experience interference from radio frequencies on cable Channel 95. You may delete this channel from
your scan by removing the "X" next to it on the Channel Summary screen.