14 Initial Setup
Channel Summary - Lock
Press the MENU button
To CHANNEL SUMMARY
To operate
To the Lock Column
Zero to lock or unlock that channel
CH | ADD |
| : | CH | ADD |
|
01 | X | – | : | 06 | X | – |
02 | X | – | : | 07 | – |
|
03 | X | – | : | 08 | – |
|
04 | X | – | : | 09 | X | – |
05 | X | – | : | 10 | X | – |
|
|
|
|
|
|
|
Exit when finished
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
THIS CHANNEL IS LOCKED BY CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT.
NO. - - - -
To watch a channel that you have locked, enter the Lock Code using the 10 key pad (see “Set Lock Code” - at the top of the next column).
If the wrong code is entered, this message will flash on the screen:
INVALID LOCK CODE !
The channel cannot be accessed until the correct code is entered.
•Once a channel has been unlocked, it will remain unlocked until the television is turned off.
Set Lock Code
Channel Guard and
Press the MENU button
To SET LOCK CODE
To operate
The padlock icon appears
Press ZERO to access the Lock Code
LOCK CODE | 0 0 0 0 |
| FINISH |
|
|
The first digit will be highlighted
To select the number
To move to the next digit
Continue to follow these directions for all four
numbers
To FINISH
To save your settings and exit
THANK YOU !!
NOTES:
After a power interruption you must reset the Lock Code.
Write your Lock Code number down and keep it hidden from potential viewers.
If you forget the Lock Code, a new code may be set using the steps listed above.