JVC C-13110 Audio/Video Connections Stereo, For Stereo Models AV-27120 AV-20120, AV-20121 Only

Page 7

Connections 7

Audio/Video Connections - Stereo

For models AV-27120, AV-20120 and AV-20121 only. Use the connection diagram below to get stereo sound from a stereo VCR.

Illustration of AV-27120

Notes

•If your VCR is mono it will have only one Audio Out jack.

•Refer to the VCR’s instructions for more information on its operation.

1)Connect the yellow video cable from the VCR’s Video Output jack to the TV’s Video Input jack.

2)Connect the white (or black) audio cable from the VCR’s Left Audio Output jack to the TV’s Left Audio Input jack.

3)Connect the red audio cable from the VCR’s Right Audio Output jack to the TV’s Right Audio Input jack.

Connecting to an External Amplifier

For Stereo Models (AV-27120,

AV-20120, AV-20121) Only.

1) Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left Audio Input jack.

2) Connect the red audio cable from the TV’s Right Audio Output jack to the Amplifier’s Right Audio Input jack.

Illustration of AV-27120

Notes

• Refer to the Amplifier’s instructions for more information on its operation.

Connecting to a Camcorder

Illustration of AV-27120

Notes

• Refer to the Camcorder’s instructions for more information on its operation.

1)Connect the white audio cable from the Camcorder’s Left Audio Output jack to the TV’s Left Audio Input jack.

2)If you have both a stereo Camcorder and TV, connect the red audio cable from the Camcorder’s Right Audio Output jack to the TV’s Right Audio Input jack.

3)Connect a yellow video cable from the Camcorder’s Video Output to the TV’s Video Input jack.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents
Color Television Users Guide Important Safety Precautions USE Table of Contents Connections Connections Connections Checklist Read ME FirstCable and VCR Connections For Stereo Models AV-27120 AV-20120, AV-20121 Only Audio/Video Connections StereoRM-C205 Remote ControlsGetting Started RM-C381Adjusting Volume PowerChanging Channels Remote Programming Setting the Catv & VCR CodesSearch Codes Function MGA VCR setupUsing this Guide Using the MenuOnscreen Menus Programming will take approximately 1 to Minutes Initial SetupAuto Tuner Setup Channel SummarySet Lock Code Channel Summary LockChannel Guard Message Chip To set up the TV Parental Guideline RatingsChip Directions to Block Viewing Directions to set up Movie RatingsSpecial Note about Ratings Directions to Block Unrated Programs Directions to Block Movie ViewingSet Lock Code Accessing V-Chip InformationPicture Settings Balance Sound SettingsBass TrebleTV Speaker General ItemsSet Clock Auto XDS Set Clock ManualBackground On/Off TimerLanguage Closed CaptionButton Functions Input Number Buttons 10 Key Pad100+ Button MutingTroubleshooting What YOU Must do for Warranty Service Limited WarrantyToll Free 1 800 Authorized Service CentersJVC Company of America Specifications