JVC XV-SA72SL manual Introduction, Features

Page 4

Introduction

Features

This unit is a compatible player for DVD VIDEO, DVD AUDIO, Audio CD, Video CD and SVCD discs.

Introduction

Picture features

7Progressive Scan system (NTSC only)

Supports the Progressive scan for NTSC system, as well as the conventional (current) Interlace scan system.

*To enjoy the progressive video picture, you must connect the unit to a television or monitor that supports the progressive video input.

Linear PCM

Uncompressed digital audio, the same format used on CDs and most studio masters.

DVD AUDIO supports up to 6 channels at sample rates of 48/96/192 kHz (also 44.1/88.2/176.4 kHz) and sample sizes of 16/20/24 bits, while DVD VIDEO supports

2 channels at sample rates of 48/96 kHz and sample sizes of 16/20/24 bits.

Audio CD/Video CD/SVCD is limited to 2 channels, 44.1 kHz at 16 bits.

7Special picture playback

7Multichannel audio outputs

Provides special picture playback functions such as

Provides the multichannel (5.1) analog audio outputs,

Strobe, Frame-by-frame, Zoom and Slow-motion.

as well as the PCM/Bitstream digital audio outputs.

7Angle function*

You can select a desired angle from multiple camera angles recorded on the DVD VIDEO disc.

7VFP (Video Fine Processor) function

You can adjust the picture character according to the type of programming, picture tone or personal preferences.

7Parental Lock*

You can restrict the playback of DVD VIDEO discs with scenes which you do not want children to see, such as adult or violent films.

Audio features

7High quality digital sound

Supports audio formats for DVD AUDIO including high sampling frequencies up to 192 kHz, the linear PCM multichannel format, up to 24-bit resolution and MLP, as well as the audio formats for DVD VIDEO such as Dolby Digital 5.1 ch., MPEG Multichannel and DTS.

DOLBY DIGITAL

A surround audio format configured with six channels. Because the “sub-woofer” channel, one of the six channels, is an auxiliary channel, this format is called “5.1-channel system.”

DTS (Digital Theater Systems)

A surround audio format configured with six (5.1) channels which is same as Dolby Digital. Because the compression ratio is lower than Dolby Digital, it provides wider dynamic range and better separation.

MPEG Multichannel

A surround audio format which can handle the augmentative 7.1-channel format (rare for home use), as well as 5.1-channel.

MLP (Meridian Lossless Packing)

A format for DVD AUDIO with the compression ratio of about 2:1 while allowing the PCM signal to be completely recreated by the MLP decoder (required in all DVD AUDIO players). It supports up to 192kHz/24- bit.

73D PHONIC function

You can enjoy Virtual surround sound with your 2 channel (stereo) system.

Other features

7Multi-language subtitles and sound*

You can select a subtitle or sound language from those recorded on the DVD VIDEO disc.

7Operation from the on-screen display

User-friendly on-screen displays allow you to operate the unit easily.

Functions with (*) mark only work on a DVD VIDEO disc that is compatible with each function.

2

Image 4
Contents 96$%.96$6 Important for Laser Products Table of Contents Features IntroductionSupplied accessories AV compulink cable xPress and hold Angle for more than 1 second To select a scene angle from the angle list display Angle÷ During DVD Video playback Safety precautions Important cautionsPreliminary knowledge Names of parts and controlsFront panel OPEN/CLOSE buttonDisplay window PROGRAM/RANDOM indicators Multi-information windowRear panel Remote control unit @ Infrared signal-emitting window TV/VIDEO Cancel button 23Button Previous button 27, 32Operational Principles On-screen displaysBasic operations of on-screen displays Opening displayDVD Control for DVD Video display Parental Lock display seeDVD Control for DVD Audio display To prevent the monitor from burning out Screen Saver CD Control displayVCD Control display for Video CD/ Svcd MP3 Control display seeHow to use numeric buttons On-screen guide iconsAbout discs Playable disc typesAudio formats Playable discsDisc structure Getting started ConnectionsBefore making any connections To connect to a conventional TVBlue Component video cable Green Red Unit Not supplied To connect to a TV with the component video input jacksRed White Audio cable Supplied Blue Green To connect to an audio amplifier or receiver About Scan ModeRed White Audio cable Supplied Amplifier or receiver Cable Audio/VideoSupplied Amplifier or receiver To connect to audio equipment with a digital input To connect the power cord Using the remote control unitTo install batteries in the remote control unit Precautions for the safe use of batteries PrecautionRemote sensor Remote sensorTo use the remote control unit for TV operation Setting the remote control signal for operating your TVYou can operate your TV from the remote control unit Manufacturer code list+10 Basic operations Turning on/off the unitInserting and removing discs Press 0 OPEN/CLOSE to close the disc trayBasic playback To start playbackTo stop playback completely To stop playback temporarilyMethod 1 from the remote control unit only To advance or reverse playback rapidly while monitoringTo locate the beginning of the scene or song MethodResuming playback To memorize the interrupted positionTo resume playback Unit memorizes the interrupted positionAdvanced operations FunctionAudio Video Playing from a specific position on a discTo locate a desired scene from the DVD menu Press TOP Menu or MenuUse the numeric buttons to select the desired item ¶ Whenever a DVD disc is loadedUnit status Disc type What is Specified Use the numeric buttons to specify the numberTo locate a desired selection using 4 or ¢ Press on ScreenPress Enter Message area For DVD AudioUse Cursor 5/∞ to move to Time SEARCH, then press Enter Use the numeric buttons 0 to 9 to enter the timeScreen example Selected time Message area For Audio CDWhen you make a mistake To locate a desired scene from the display DigestPress Digest Use Cursor 5/∞/2/3 to move to select the desired sceneSpecial picture playback To playback in slow-motion SlowTo display continuous still pictures Strobe Press and hold 8 for more than 1 secondUse Cursor 5/∞/2/3 to move the zoomed position Press Zoom + orTo return to normal playback Press Enter ¶ During playback or while pausedChanging the playback order To playback in the desired order ProgramUse Cursor 5/∞ to move to Program and press Enter Press 3 to start program playTo playback in random order Random Use Cursor 5/∞ to move to RandomTo quit program playback To quit random playback in the middleRepeat playback Press RepeatUse Cursor 5/∞ to move to REPEAT, then press Enter During DVD Video playbackSelected repeat mode For Svcd Audio CD/Video CD/SVCDDisc type Display window On-screen display To stop repeat playback PressSelecting a scene angle To select a scene angle from the normal screen AngleFrom normal screen Use Angle or Cursor 2/3 to select the desired angleFrom on-screen display Use Cursor 2/3 or Angle to select the desired angle numberTotal number Recorded anglesTo select the subtitle language Subtitle Changing the language and soundFrom on-screen display except DVD Audio To change the audio language or sound Audio Press Audio S.FREQUse Audio S.FREQ or Cursor 2/3 to select the desired audio Use Cursor 5/∞ or Audio S.FREQ to move to AudioPress VFP Progressive Scan to select Desired preset To adjust the picture character VFPMiscellaneous functions Adjust the level of the parameter using Cursor 2/3 Select the desired mode by using 3D PhonicSelected effect mode To simulate surround sound 3D PhonicPress Cursor 2/3 to adjust the effect level Use Cursor 5/∞ to move to Time SelectDuring playback for DVD AUDIO/Audio CD While stoppedTo select a still picture on a DVD Audio disc From normal displayUse Cursor 5/∞ or page to move to Use Cursor 2/3 or page to select the desiredPress Cursor 5 or ∞ while holding down To playback a bonus group of a DVD Audio discDisplay Window TV screen Press Audio S.FREQ for more than one second Checking the sampling frequencyActual sampling frequency Display window What is MP3? MP3 disc playbackAbout MP3 disc OperationsHighlight a desired Track using Cursor Specifying the desired Group and TrackSelected Group SelectedTrack Track timeRepeat playback You can repeat playback of the current track or group¶ During playback or while stopped To stop repeat playbackInitial settings How to set preferencesSelecting preferences Language and display preferenceSetting changes as follows Which show what isUnit can display on Screen guide icons or Characters on the picture43 LB. Letter Box Conversion 43 PS. Pan Scan ConversionAuto Wide Television screen Normal Wide Television screenAudio and system preference Only for Dolby Digital DVD Video Discs Speaker setting Speaker Channel settingSpeaker size settings Available only when selecting Expert Select the speaker to be set using CursorSpeaker level Available only when selecting Expert Bass redirect Available only when selecting ExpertDelay Available only when selecting Expert Limiting playback by children Test tone Available only while setting Level orTo set Parental Lock for the first time Enter your 4-digit password using the numeric buttons 0 to To change the settingsPress Enter while holding down 7 on the remote control unit Moves to the Password field When selecting noUse the Cursor 5/∞ to move to YES, then press Enter Press 0 OPEN/CLOSEAV Compu Link remote control system Connection and setupAdditional information To AV Compu Link II or EX DVD playerOperation Turn on the main power of the televisionYou connect the component video output to your TV How to handle discs Maintenance of discsCare and handling of discs Label sideTroubleshooting Symptom Possible case RemedySpecifications Appendix a Table of languages and their abbreviations Appendix B Country code list for Parental Lock JVC 0801AOMDTEJSC