JVC XV-S500BK manual About discs, Playable disc types, Non-playable discs, Audio formats

Page 6

Introduction

Introduction

About discs

Playable disc types

Playable and non-playable disc types are as follows:

DVD VIDEO

SVCD

Video CD

Audio CD

V I D E O

The DVD Logo is a trademark.

CD-R and CD-RW discs recorded with the Audio CD, Video CD, SVCD, MP3 or JPEG format can be played back, though some may not be played back because of the disc characteristics or recording condition.

Note that unfinalized discs cannot be played back.

DVD-R discs recorded with the DVD VIDEO format can be played back, though some may not be played back because of the disc characteristics or recording condition.

Note that unfinalized disc cannot be played back.

DVD VIDEO players and DVD VIDEO discs have their own Region Code numbers. This unit can play back only DVD VIDEO discs whose Region Code numbers include "1".

Examples of playable DVD VIDEO discs:

ALL

1

1 5

1

2

1 2 3

3

4

4 5 6

 

 

 

This unit accommodates the NTSC system, also can play back discs recorded with PAL system whose Region Code numbers include "1".

Note that the PAL video signal on disc is converted to an NTSC signal and output.

Non-playable discs

DVD-ROM, DVD-RAM, DVD-RW, DVD+RW, DVD-AUDIO, CD-ROM, PHOTO CD, CD-EXTRA, CD-G, CD-TEXT, SACD,

MIX-MODE CD

Playing back discs listed as "Non-playable discs" above may generate noise and damage speakers.

This unit can play back audio signals recorded in CD-G, CD-EXTRA, CD-TEXT and MIX-MODE CD discs.

Audio formats

There are some audio formats recorded on discs as shown below.

Linear PCM

Uncompressed digital audio, the same format used on CDs and most studio masters.

DVD VIDEO supports 2 channels at sampling rates of 48/96 kHz and quantization of 16/20/24 bits.

Audio CD/Video CD is limited to 2 channels, 44.1 kHz at 16 bits.

Dolby Digital

A surround audio format configured with six channels. Because the "LFE (Low-Frequency Effect for sub-woofer, etc.)" channel, one of the six channels, is an auxiliary channel, this format is called "5.1-channel system".

Not all Dolby Digital discs contain six (5.1) channel information.

DTS (Digital Theater Systems)

A surround audio format configured with six (5.1) channels which is same as Dolby Digital. Because the compression ratio is lower than Dolby Digital, it provides wider dynamic range and better separation. Not all DTS discs contain six (5.1) channel information.

The associated indicator lights up in the display window when playing back a disc.

Indicator

Audio format

 

 

LPCM

Linear PCM

 

 

DOLBY DIGITAL

Dolby Digital

 

 

DTS

DTS (Digital Theater Systems)

 

 

Note that, with some formats and/or depending on the unit's "DIGITAL AUDIO OUTPUT" setting, digital audio signals are not always output from the unit's DIGITAL OUT jacks as are recorded on the disc.

See "DIGITAL AUDIO OUTPUT" on page 50 for details.

4

Image 6
Contents XV-S500BK/XV-S502SL LET0200-002B J/UJMises en garde, précautions et indications diverses Table of Contents Supplied accessories R6PSUM-3/AA15F battery x AC power cord xIntroduction Safety precautions Important cautionsNon-playable discs About discsPlayable disc types Audio formatsDisc structure Video CDs and SVCDs with Playback Control functionBefore making any connections Getting startedConnections To connect to a TVAbout Scan Mode Connection to a TV equipped with component jacksTo connect to a stereo audio amplifier/receiver Setting Source type of DVD VideoProgressive Mode Film Source Video SourceTo connect the power cord To connect to digital audio devicePrecautions for the safe use of batteries Using the remote control unitTo install batteries in the remote control unit PrecautionSetting the remote control signal for operating your TV To use the remote control unit for TV operationTo control the volume of a JVCs amplifier or receiver Manufacturer code listBasic operations Before operationTurning on/off the unit Use 5/∞ to select a desired language Initial setup before using the unitUse 5/∞ to select a desired digital output signal type Press EnterOPEN/CLOSE Basic playbackInserting and removing discs 0OPEN/CLOSETo stop playback temporarily To start playbackTo stop playback completely PressResuming playback When the resume mode is set to Disc ResumeWhen the resume mode is set to on To memorize the interrupted positionTo resume playback ¶ While stopped, or no disc is insertedTo advance a still picture frame-by-frame Variable speed playbackTo advance or reverse playback rapidly while monitoring To playback in slow-motionTo locate the beginning of the scene or song To locate a desired selection using 4 or ¢To locate a desired selection using the numeric buttons Press 4 or ¢Press on Screen Other convenient functionsTo check the playback status On Screen AngleExample of the menu bar for DVD Video To change the brightness of the display windowPress 5 or ∞ while holding down Angle See page 35 for details about the menu barPress TOP Menu or Menu Advanced operationsTo locate a desired scene from the DVD menu Press 3 or TOP MenuPress on Screen twice To specify a desired titleUse the numeric buttons to select the desired item Use 2/3 to move to , then pressTo locate a desired scene from the display Digest Use the numeric buttons 0 to 10 to enter the desired timePress Digest To playback in the desired order Program playback Disc type Unit status What is displayedChanging the playback order Use 5/∞/2/3 to move To select Desired scenePress 3 to start program playback To playback in random orderRandom playback Use 2/3 to move to RNDTo stop and quit random playback Repeat playbackPress Repeat To stop repeat playback PressAudio CD/Video CD/SVCD Use 5/∞ to select A-BDuring DVD Video playback To quit A-B repeat playbackPress Subtitle Changing the language, sound and scene angleTo select the subtitle language Subtitle For DVD VideoUse Audio or 5/∞ to select the desired audio To change the audio language or sound AudioPress Audio AudioTo select a scene angle of DVD Video Angle From the angle listFrom Angle selection window Special picture playback and picture/sound effect To display continuous still pictures StrobeTo zoom in/out pictures Zoom Adjust the level of the parameter using 5/∞ To adjust the picture character VFPUse 2/ 3 to select the desired preset Press VFP Progressive ScanTo simulate surround sound 3D Phonic Select the desired mode by using 2/3Press 5/∞ to adjust the effect level Press 3D PhonicUse 2/3 to select icon you want to work with Menu bar functionsTo bring up the menu bar Press on Screen againSelected Icon Operation Use To select the repeat mode amongMenu bar functions for DVD Video Press Enter to open the pull-down windowMenu bar functions for Audio CD/Video CD/SVCD Press Enter to activate random playback Audio channelsOperations MP3 disc playbackAbout MP3 disc Basic operationsMove the bar to a desired Group using 5/∞ ¶ When the MP3 Control display is shownSelecting the desired Group and Track Use the numeric buttons to specify a desired Track number Direct selectionUse the numeric buttons to specify a desired Group number MP3 ControlWhat is JPEG? Jpeg disc playbackAbout Jpeg disc Basic operations To see a desired pictureTo playback another picture ¶ During Jpeg picture is shown on the TV screen To zoom in/out the picture ZoomPlayback pictures from the beginning of the disc ¶ After inserting a Jpeg discSelect a desired file using 4/¢ Press Selecting the start point of the slide showFrom the Jpeg Control display Jpeg TV Screen Selected repeat modeRepeat function DisplayChanging the initial settings Selecting preferencesAbout the Preference display Menu item Setting options LanguageTable of languages and their abbreviations Monitor Type Progressive Mode VideoPicture FilmDigital output signal chart AudioAnalog Down MIX Dolby Surround StereoRange Compression Auto Others Press Enter Parental Lock display Limiting playback by childrenUse 5/∞ to select the country code ¶ While the Others page of the preference display is shownMoves to Password To change the settingsEnter your 4-digit password using the numeric buttons 0 to Available You can change the Parental Lock settings laterAssociated pull-down menu while points the appropriate item Use 5/∞ to select a desired option and pressEnter Enter Front panel Additional informationNames of parts and controls Display windowRemote control unit 10 0 +10AV Compu Link remote control system Connection and setupOperation Symptom Possible cause Remedy TroubleshootingPower OperationPicture Frequently Asked Questions Question Answer Ref.Specifications Appendix a Country code list for Parental Lock Appendix B Glossary DTSMP3 MpegPBC Appendix C Index Authorized Service Centers Limited Warranty JVC 0102KTYDTEJSC