JVC LET0227-003A Changing the playback order, To play back in a specific order, Program play

Advanced operations

Numeric buttons

CANCEL

5/∞/2/3

ENTER ON SCREEN

7

3

PROGRAM

No.

1

2

3

4

5

6

7

8

9

10

The total program time

	Total Program Time	00:25:12
	TrackDisc
2	1
3	5
7	4
4	2
3	3
5	4
6	6

REPEAT

Changing the playback order

Advanced operations	To play back in a specific order
	(Program play)

By programming tracks, you can play up to 99 tracks in any order. You may program the same track more than once.

1 In stop mode, press ON SCREEN twice.

The menu bar appears on the TV screen.

2 Press 2/3 to move to PROG. .

Screen example for Audio CD

TRACK 1 TIME 0:00

OFF PROG. RND.

3 Press ENTER.

The program table appears.

The [PROG] indicator lights up in the display window.

4 Press the numeric buttons to specify tracks in the desired order.

To select 5: press 5.

To select 23: press +10, +10, then 3.

To select 40: press +10, +10, +10, then 10.

USE NUMERIC KEYS TO PROGRAM TRACKS.

CANCEL DELETES THE LAST STEP. 7 DELETES ALL.

Selected track number

To correct the program

Press 5/∞ to move to the track to be corrected, then press CANCEL. The track is erased and the subsequent programmed tracks move up.

Pressing 7 clears all the programmed tracks.

5 Press 3 to start program playback.

With an Audio CD disc, the program table remains on the TV screen during program playback. (Pressing ON SCREEN brings up the status bar.) When all of the programmed tracks have finished playback, the unit stops and the program table appears again.

Note that the program remains.

•During program playback, you cannot edit the program contents.

To check the program contents

During playback, press 7. Playback stops and the program table is shown.

When the unit is playing back an Audio CD and the program table is not shown, you can bring up the table by carrying out steps 1 to 3.

During SVCD/Video CD playback, you can check the program contents via the menu bar.

To stop program playback

Press 7.

To clear the program

While stopped and the program table is shown, press 7.

To exit the program mode

After clearing the program, press ON SCREEN.

NOTE

When the disc is not inserted or the unit is turned off, the program is cleared.

18