Basic operations
| 7 8 |
| 4 ¢ 3 |
| Numeric buttons |
4 | ¢ |
7 | 8 |
1 | ¡ |
Basic operations | 3 |
|
•If you interrupt the playback of a disc for which an interrupted position has already been stored, the memory will be updated with the new interrupted position.
•For a
•When the unit memorizes an interrupted point for a disc, it also memorizes Audio, Subtitle and Angle settings.
•The unit may not resume playback exactly from the interrupted point. In the case of an SVCD/Video CD disc with PBC function, the unit may resume playback from a point slightly earlier or later than the point where playback was interrupted.
Various speed playback
x1.5 Quick Playback with sound
To resume playback
When the resume mode is “ON”
While the disc you interrupted playback is still in the disc slot, press 3.
The unit resumes playback from the position where playback was interrupted. The TV screen shows [RESUME PLAY].
To play back from the beginning
Press 7 before pressing 3 to start playback.
When the resume mode is “DISC RESUME”
1 Insert a disc for which the unit has stored an interrupted position.
The TV screen shows [RESUME STOP].
2 Press 3.
The TV screen shows [RESUME PLAY] and the unit resumes playback from the position where playback was interrupted.
To play back from the beginning
After inserting the disc, press 7 before pressing 3 to start playback.
NOTES
•If you change the [RESUME] setting from [DISC RESUME] to [OFF] or [ON], you cannot resume playback of a disc whose “resuming” position is stored. However, when you again set [RESUME] to [DISC RESUME], you will then be able to resume playback of the disc.
During playback, press ¡ on the remote control unit.
The disc is played back at about 1.5 times normal speed.
The sound is not muted, and the subtitle does not go off.
To return to the normal playback
Press 3.
NOTES
•x1.5 Quick Playback can also be achieved by pressing ¡ once. (See next section.)
•At the x1.5 Quick Playback mode, the digital sound is output in stereo linear PCM format. Note that the sound of a
•Depending on a disc, the sound may not be in tune, or the sound quality may alter during the x1.5 Quick Playback mode.
To advance or reverse playback rapidly while monitoring
During playback, press ¡ or 1 on the remote control unit.
You can select from 1.5 times, 5 times, 20 times and 60 times normal speed. Pressing 3 returns the unit to normal playback.
14