Preparations
Preparations
Connections
Before using the unit, connect the unit to a TV and/or amplifier.
Before making connections
• Do not connect the AC power cord until all other |
connections have been made. |
• Connect VIDEO OUT of the unit directly to the |
video input of your TV. Connecting VIDEO OUT of |
the unit to a TV via a VCR may cause a monitor |
problem when playing back a |
You may also have a monitor problem when |
connecting the unit to an integrated TV/Video |
system. |
• When you use a commercial cable, be sure to |
check the cable size, flexibility, and the size of the |
NOTES
•In this connection, set the VIDEO SIGNAL SELECTOR to “COMP./RGB.”
•If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural.
BTo connect to a TV with the SCART connector
You can enjoy using the unit by simply connecting it to your television set with a
TV
IN
plug, and use an equivalent one. When you do not |
use the equivalent one, the cover may not be able |
to attached. |
• Before connection, install the unit and set the |
DIRECTION switch on the rear of the unit according |
to your installation (see page 6). |
• In the following description, “TV” may be substituted |
with “monitor” or “projector.” |
• Terminal names used for other components may be |
different from those used in the following description. |
• For details on how to attach the cover, see page 6. |
The unit
SCART cable (Not supplied)
Connecting to a TV
The following sections A and B describe TV connections where only a TV is connected to the unit so that you will hear audio from the TV.
AConnecting to a conventional TV
TV
AUDIO
VIDEO RIGHT LEFT
VIDEO SIGNAL SELECTOR
See the “NOTES” below.
This illustration is upside down. (The bottom side is up.) For details on the connectors’ name, see page 38.
NOTES
•In this connection, you need to set the VIDEO SIGNAL SELECTOR correctly according to your TV. See below for details.
•Do not connect multiple devices using multiple connectors.
| Yellow | Red | White |
Audio/video |
|
| |
cable | Red |
| Yellow |
(supplied) | White |
|
|
The unit
VIDEO SIGNAL SELECTOR
See the “NOTES” below.
This illustration is upside down. (The bottom side is up.) For details on the connectors’ name, see page 38.
Set the VIDEO SIGNAL SELECTOR correctly according to your TV
COMP./RGB 
Y/C
VIDEO SIGNAL
SELECTOR
•If your TV only accommodates the composite video signal, set the VIDEO SIGNAL SELECTOR to “COMP/ RGB.”
•If your TV accommodates Y/C signals, set the VIDEO SIGNAL SELECTOR to “Y/C” so that you can enjoy
•If your TV accommodates RGB signals, set the VIDEO SIGNAL SELECTOR to “COMP./RGB.”
4