IR REMOTE/OSD
IR REMOTE AND OSD OPERATION
This unit is now shipped with a simplified remote control that allows for direct access to most commands used to control the processor.
Adjustments can be made three different ways:
1.Press the Menu button to activate the OSD and use the Function and Value keys to make changes. Press Menu again to remove OSD.
2.Press the direct access key (Brightness, etc.) and then adjust using the left/right value keys.
3.Press the direct access key and then enter a three digit number (i.e. 040 for 40).
4.For direct access to the RGB input: Press DVI + 1
(allow about one second between commands)
|
| OFF |
| Turn unit |
Select Inputs | VIDEO |
|
| On/Off |
|
|
|
| |
| DVI/RGB | YCrCb |
| |
DVD button |
|
|
| Press to |
not active | DVD |
| PASS/TX | toggle |
|
|
| ||
|
| MENU |
| between |
Navigate |
|
|
| pass- |
|
|
| through and | |
Menus |
|
|
| |
PROFILE |
| STORE | pass- | |
|
| |||
|
| through | ||
|
|
|
| |
| 1 | 2 | 3 | transcode |
Enter | 4 | 5 | 6 |
|
Numbers |
| |||
|
|
|
| |
| 7 | 8 | 9 |
|
|
| 0 |
| Adjust Picture |
| BRIGHTNESS |
| CONTRAST | |
| COLOR | TINT | DETAIL |
|
| ANAMORPHIC 4:3 | LETTERBOX |
| |
ON SCREEN DISPLAY (OSD)
Accessing the OSD
1.Press Menu button to bring up main Index.
2.Use Function Up/Down Keys until the triangle at the top of the OSD turns yellow.
3.Use the Left/Right keys to move to the next menu page. A list of available Functions will appear.
4.Press Function Up/Down keys to select an adjustment.
5.Use Value Left/Right keys to adjust.
The main menu drops away and a single line menu appears.
6.Use the Function keys to return to the drop down menu.
7.Press Menu at any time to cancel OSD
●Unused inputs can be deactivated for simpler operation of the processor. See the Setup instructions for details.
INPUT | PICTURE | DISPLAY | PATTERNS |
|
|
|
|
| Press the Function UP/Down | ||
| |||
FORMATS | keys until the triangle turns Yellow. | ||
| Press the Value Left/Right keys to | ||
| |||
| cycle to the Menu tabs. |
|
|
|
| ||
INPUTS | DVD |
|
|
|
|
|
|
|
| ||
ASPECT | ANAMORPHIC |
|
|
|
|
|
|
|
|
|
|
PROFILE | Use the Value Left/Right | ||
| |||
| keys to change selection | ||
RECALL | or values. |
|
|
F 1 2 3 4 |
|
| |
|
|
|
|
STORE | 1 2 3 4 |
|
|
|
|
|
|
The OSD consists of four menu tabs:
Input - Picture - Display - Patterns
10