Rear panel
For XV-S402SL/XV-S403SG
1 2
Preliminary knowledge
English
DIGITAL OUT |
| VIDEO OUT |
|
PCM / STREAM |
| COMPONENT | |
COAXIAL | Y | PB | PR |
|
|
| |
OPTICAL |
|
|
|
AUDIO OUT
VIDEO OUT SELECT
AND AND
VIDEO VIDEO NTSC PAL
AV COMPU LINK
2
AC IN
3 4 | 5 | 6 | 7 | 8 | 9 | 0 |
1 DIGITAL OUT jack (OPTICAL/COAXIAL) (18)
Outputs digital audio signals. Both coaxical and optical connectors are provided. You must select the signal type correctly according to the external device connected to via the Preference display.
2COMPONENT VIDEO OUT jacks (Y/PB/PR) (17) Output component video signals.
To enable these jacks, select VIDEO OUT SELECT
3S-VIDEO OUT jack (16) Outputs a S-video signal.
To enable this jack, select VIDEO OUT SELECT
4VIDEO OUT jack (16)
Outputs a composite video signal.
This jack is enabled regardless of VIDEO OUT SELECT
5AUDIO OUT jacks (LEFT/RIGHT) (16, 17) Outputs stereo analog audio signals.
6VIDEO OUT SELECT switch
Otherwise, the changed setting will not be effective.
7VIDEO OUT SELECT switch (NTSC/PAL) (16) Select “NTSC” or “PAL” to match the color system of your TV.
Note that you must change the switch position while the unit power is off (on standby).
Otherwise, the changed setting will not be effective.
8AV COMPU LINK jacks (52)
Connects with other JVC equipment supporting the AV Compulink function to facilitate integrated operations.
9 AC IN connector (19)
Connects to the wall outlet using the suppplied AC power cord.
0 Region Code label (15) Shows Region Code number.
Preliminary | knowledge |
|
|
For XV-S332SL
1 2
DIGITAL OUT |
|
| VIDEO OUT |
|
|
|
PCM / STREAM |
| COMPONENT |
|
|
| |
| Y |
| PB | PR |
COAXIAL
AUDIO OUT
VIDEO OUT SELECT
VIDEO
NTSC PAL
AV COMPU LINK
2
AC IN
3 4 | 5 | 6 | 7 | 8 | 9 | 0 |
1 DIGITAL OUT jack (COAXIAL) (18)
Outputs digital audio signals. You must select the type correctly according to the external device connected to via the Preference display.
2 COMPONENT VIDEO OUT jacks (Y/PB/PR) (17)
Output component video signals.
To enable these jacks, select VIDEO OUT SELECT
3
Outputs a S-video signal.
To enable this jack, select VIDEO OUT SELECT
4 VIDEO OUT jack (16)
Outputs a composite video signal.
To enable this jack, select VIDEO OUT SELECT
Connects to the wall outlet using the suppplied AC power cord.
0 Region Code label (15) Shows Region Code number.
11