Getting started
To connect to an audio amplifier or receiver
You can enjoy
The unit
DIGITAL OUT | VIDEO OUT |
|
|
| |
PCM / STREAM | COMPONENT |
| AV COMPU LINK | ||
COAXIAL | Y | PB | PR |
| |
|
|
| VIDEO OUT SELECT | ||
OPTICAL |
|
|
| COMPONENT | |
|
|
|
| AND | AND |
|
|
|
| VIDEO | VIDEO |
|
|
|
|
| NTSC PAL |
VIDEO | RIGHT | LEFT |
|
|
: For
Red White
White
Red
Audio cable (not supplied)
Amplifier or receiver
IN
LEFT
AUDIO
RIGHT
Getting started
•Connect the unit's AUDIO OUT to any
To connect to audio equipment with a digital input
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks (OPTICAL* or COAXIAL) to the digital input of a receiver, MD, etc. by using an optional digital cable. The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a
When you make the digital connection, we also recommend to make the analog connection, because, depending on discs, no signal may be output from the DIGITAL OUT.
* : The OPTICAL jack is equipped for
The unit
DIGITAL OUT |
| VIDEO OUT |
|
|
|
PCM / STREAM |
| COMPONENT |
| AV COMPU LINK | |
COAXIAL | Y | PB | PR |
| |
|
|
| VIDEO OUT SELECT | ||
OPTICAL |
|
|
| COMPONENT | |
|
|
|
| AND | AND |
|
|
|
| VIDEO | VIDEO |
|
|
|
|
| NTSC PAL |
VIDEO |
|
|
|
Red | White | : For | Optical digital cable |
| |
|
|
| (not supplied) |
| |
|
| Coaxial digital cable |
|
|
|
|
| (not supplied) | Digital equipment |
| |
|
|
| White | IN | IN |
|
|
|
| OPTICAL | |
|
|
|
| LEFT | |
|
|
|
| AUDIO | DIGITAL |
| Audio cable |
|
| RIGHT | COAXIAL |
|
| Red |
|
| |
| (not supplied) |
|
|
|
|
The OPTICAL jack is protected by the cover.
To connect the optical cable to the jack, pull out the cover and then connect the plug to the jack inside in the correct direction (For
NOTES
•When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT” setting in the “AUDIO” page of the preference display correctly according to the connected audio equipment. If the “DIGITAL AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See “DIGITAL AUDIO OUTPUT” on page 46.
•With the digital connection, the COMPRESSION settings in the AUDIO page of the preference display are invalid. Settings for these items must be made from the decoder.
18