JVC LET0091-001A, XV-D2000BK manual Monitor Type

Selecting Preferences

MONITOR TYPE

You can select a monitor type when you playback DVD discs recorded for wide screen televisions.

If your television has a normal (4:3) screen, select “4:3 PS ” (cuts both sides of the “wide” picture) or “4:3 LB ” (with masking bars to maintain the “wide” aspect ratio).

[on DVD disc]	[4:3 (normal) television screen]
	converted and output
	letter box conversion
squeezed recording	[16:9 wide television screen]
	pan scan conversion

If your television has a wide (16:9) screen, you have to select “16:9 WIDE”.

AV COMPULINK MODE

If you use the AV Compulink system, you must set this item correctly.

Select from the three options: DVD1, DVD2 and DVD3 according to the equipment to be connected.

See “AV Compulink remote control system” on pages 62.

DIGITAL AUDIO OUTPUT

To connect the player‘s digital output with an external amplifier or receiver equipped with a digital input, this item must be set correctly.

PCM ONLY: to connect to a PCM digital input of a piece of audio equipment.

PCM/AC-3: to connect to a Dolby digital input of a Dolby Digital decoder or an amplifier with built-in Dolby Digital decoder.

The following chart shows the relationship between kinds of playback discs and output signals.

Playback discs	Output	Output
	(PCM/AC-3 mode)	(PCM ONLY
		mode)
DVD with 48-kHz, 16-bit linear PCM	48-kHz, 16-bit linear PCM	←
DVD with 48-kHz, 20/24-bit linear PCM	48-kHz, 20-bit linear PCM	←
DVD with 96-kHz, linear PCM	no output	←
DVD with Dolby Digital	Dolby Digital bitstream	48-kHz,
		16-bit
		linear
		PCM
DVD with MPEG audio	48-kHz, 16-bit linear PCM	←
CD	44.1-kHz, 16-bit linear PCM	←
Video CD	44.1-kHz, 16-bit linear PCM	←

55