JVC KD-DV5300 How to reset your unit, How to forcibly eject a disc, How to use functions mode

Page 3

How to reset your unit

• Your preset adjustments will also be erased.

How to forcibly eject a disc

•Be careful not to drop the disc when it ejects.

•If this does not work, reset your unit.

How to use functions mode

If you press M MODE, the unit goes into functions mode, then the number buttons and 5/∞ buttons work as different function buttons.

[Within 5 seconds...]

WARNINGS:

To prevent accidents and damage

•DO NOT install any unit in locations where;

–it may obstruct the steering wheel and gearshift lever operations.

–it may obstruct the operation of safety devices such as air bags.

–it may obstruct visibility.

•DO NOT operate the unit while driving.

•If you need to operate the unit while driving, be sure to look ahead carefully.

•The driver must not watch the monitor while driving.

If the parking brake is not engaged,

“DRIVER MUST NOT WATCH THE MONITOR WHILE DRIVING.” appears on the monitor, and no playback picture will be shown.

–This warning appears only when the parking brake wire is connected to the parking brake system built in the car (refer to the Installation/Connection Manual).

For safety...

•Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.

•Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

ENGLISH

Indication language:

In this manual, English indications are used for purposes of explanation. You can select the indication language on the monitor on the “LANGUAGE” setting (see page 30).

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents For canceling the display demonstration, see For customer UseModel No Serial No GET0444-001A Possible performance from the unit Qualified service personnel Optical instrumentsInformation For U.S.A Thank you for purchasing a JVC productFor safety How to reset your unitHow to forcibly eject a disc How to use functions modeAttaching the control panel Detaching the control panelContents CD/VCD Disc typeDVD DVD-RAMSet the clock Cancel the display demonstration and set the clock@ Finish the procedure PreparationBasic operations Control panel Display window Installing the lithium coin battery CR2025For FM/AM tuner operations Extra MonitorDVD/RECEIVER For advanced disc operationsHow to select a preset station How to select a numberSearch for a station to listen-Auto Search Select preset stationMO indicator lights up Listening to the radioPlayback starts automatically Disc operationsBefore performing any operations Insert the discDisc type Operations using the control panelSelect chapter Stop playPress Select track Select folderPress Select tracks Canceling the PBC playbackWork Press Select track Select audio channel ST stereo, L left, R RightEx. Time search DVD Ex Enlarging the view-Zoom in DVD/DivX/MPEG Video/VCD⁄ Remove the on-screen bar Entering time/numbersINT On-screen barControl screen To select a playback mode~ Show the control screen Select a folder or track ⁄ Start playbackMode Playback functions Select a track to start playingList screen See Listening to the CD changer~ Select CD-CH Select a disc to start playing Change the display informationOnly Channel 0, 1, and 247 are available before activation GCI Global Control Information updateListening to the satellite radio Check your Sirius ID, seeChecking the XM Satellite radio ID ~ Select Sirius or XM Select the bandsSelect a category ⁄ Select a channel to listen Tune in to a channel you wantEnter the main menu Listening to the iPod / D. playerConfirm the selection ~ Select Ipod or D. Player Select a song to start playingListening to the other external components You can connect an external component toAUX input terminal on the control panel Selecting a preset sound mode Preset valuesIndication For Finish the procedure Adjusting the soundAdjust the level Enter the PSM settings Select a PSM itemClock H DemoCLK Disp *1 OFFEXT DimmerScroll *5 Once EXT in *6Disc setup menu ⁄ Select an optionTo return to normal screen Down MIX Monitor Type PictureFile Type OutputAssign a title ⁄ Finish the procedureAssigning titles ~ Select FM/AM Show the title entry screenMaintenance More about this unit GeneralDisc Satellite radio IPod or D. playerTitle assignment About sounds reproduced through the rear terminals General settings-PSMDisc setup menu Output signals through the Digital OUT terminalReverse search On-screen guide iconsPlayback Forward searchLanguage Language codesSymptom Remedy/Cause TroubleshootingCD changer Satellite radio Video/MP3/WMA/WAVRadio Reset this unitConnecting a D. player Reset the iPod or D. playerSpecifications Power Output≤ 1% THD+N 96 dB Allowable Operating TemperatureNon-contact optical pickup semiconductor laser Channels stereoCall Sumidero térmico Esta unidad está diseñada para funcionar con 12 V de CC, conCordón de alimentación Sujeción Estuche duro/Panel de controlCubierta Placa de guarniciónTornillo opción Soporte opciónTabique a prueba de incendios Tablero de instrumentosTerminal de tierra posterior Los componentes externos véase el diagramaVéase diagrama Salida de línea véase diagramaCable óptico digital *3 Conecte el cable del freno de estacionamiento a este puntoApriete la sujeción con firmeza Cordón de video *3Al jack DC Jack para el cambiador de CDAl jack para auriculares Miniclavija estéreo

KD-DV5300 specifications

The JVC KD-DV5300 is a versatile car audio receiver that captures attention with its blend of multimedia functionality and sleek design. Primarily known for its ability to play DVDs and CDs, this model excels in delivering entertainment on the go. With support for a range of formats, including MP3, WMA, and JPEG, users can access their favorite music tracks and photo slideshows seamlessly.

One of the main features of the KD-DV5300 is its vivid 7-inch LCD screen, which provides an immersive visual experience. The display allows for crisp image quality, perfect for watching movies or viewing album art. Its touchscreen interface simplifies navigation and enhances user interaction, making it easy to switch between different media sources or adjust settings on the fly.

The receiver is equipped with a powerful built-in amplifier, offering 50 watts of peak power per channel. This ensures that audio playback is clear and impactful, regardless of the listening environment. In addition, the KD-DV5300 boasts a variety of audio adjustments, including a 3-band parametric equalizer, allowing users to fine-tune their listening experience according to personal preference.

Connectivity is another highlight of the JVC KD-DV5300. It features USB and AUX inputs, enabling seamless integration with portable devices such as smartphones, tablets, and flash drives. This connectivity allows users to play their digital music libraries easily or to charge their devices while on the road. Furthermore, the receiver supports Bluetooth technology, facilitating hands-free calling and wireless audio streaming for added convenience and safety while driving.

In terms of compatibility, the KD-DV5300 is designed to work with various aftermarket amplifiers and subwoofers, thanks to its multiple pre-out RCA outputs. This flexibility allows car audio enthusiasts to expand their sound systems according to their preferences.

Overall, the JVC KD-DV5300 stands out as a feature-rich car audio solution. With its multimedia capabilities, robust sound quality, and user-friendly interface, it caters to the needs of modern drivers looking to enhance their in-car entertainment experience. Whether enjoying favorite tunes or catching up on movies, this receiver promises to transform mundane travel into a captivating journey.
Top Page Image Contents