32 EN BASIC OPERATIONS ON HDD DECK
Instant Replay | Marking Positions To Play Back Again Later |
You can move back the playback position slightly.
Press w on the remote control or INSTANT REPLAY on the unit.
●Each press skips back for approximately 7 seconds and resumes playback.
●Pressing while paused skips back for approximately 7 seconds and resumes pause.
1.5x Speed Playback
You can play back a title quickly. The sound will also be played back faster than normal speed during 1.5x speed playback. 1.5x speed playback cannot be performed during recording on HDD or DVD.
1Press O to locate the point to start 1.5x speed playback from.
2Press I to resume playback.
3Press N once.
●Pressing ON SCREEN displays AX1.5B on the top right corner of the screen.
NOTES:
●When the unit is connected with a digital audio device using an optional optical cable, set ADIGITAL AUDIO OUTB to APCM ONLYB. (A pg. 26)
●For programs recorded in DV mode, 1.5x speed playback with sound is not possible.
It is possible to mark positions (up to 999 points) where you want to play back once again later, and start playback from a marked position. Marking onto the disc when recording is helpful to locate a start point when you play back the disc later.
To mark positions:
During playback, press MARK at positions you want to mark.
●AMARKB appears on the TV
screen. You can easily locate the marked positions using S or T when you play back the disc.
To delete the marked positions: While paused, press S or T to locate a marked position you want to delete, then press MARK.
●Crossed AMARKB appears on the TV screen, and the marked position is deleted.
Jump Search
You can locate a scene ahead or behind the current one by jumping scenes according to selected time intervals (A pg. 59) during playback (or Live Memory Playback).
Press S or T.
●To advance forward or back, press S or T repeatedly within 5 seconds of each press to continue jump.
●Depending on the time from where you want to start jump search, the first press of S or T will not necessarily lead to a jump of the selected time interval. The first press will lead to a jump to the nearest quarter points of an hour (15 min/ 30 min/ 45 min/ 00 min). The subsequent jumps will then be in accordance to the selected time interval.
●When you cannot advance any further (beginning or end of program reached), the message AUNABLE TO GO BACK ANY MOREB or AUNABLE TO GO FORWARD ANY MOREB appears on the screen. In such a case, press S, O, N, T or o.
Example:
Playback search when jump interval is set to 15 MIN jumps. Taking for instance, you want to start jump search 40 minutes after the beginning of the program. Pressing S or T will result in a jump to the scene at the 30 minutes point or 45 minutes point respectively as illustrated below. At the subsequent press, the scene will jump to the 15 minutes point or 1 hour point respectively, according to the selected time interval, which in this case is A15 MINB.
Time counter |
|
|
|
|
|
|
|
|
| ||
0 min | 30 min | 40 min |
| 1 h 15 min | |||||||
| 15 min |
| 45 min | 1 h |
|
| |||||
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Beginning of program |
| Current scene |
| End of program | |||||||
NOTE:
Jump search functions only when chapters (marks) are not set.